Hello Rick, I got it. really appreciated for your help.
Regards, Ferey On Thu, Jul 16, 2015 at 3:46 PM, Williams, Rick L <[email protected]> wrote: > Hi Ferey, > > > > In Spectrum, use the MIB Tools and find your MIB and OID. Then use the Map > tab to create and attribute that you can then watch. > > > > Rick Williams > > Network and Systems Management > > State of North Carolina > > Office of Information Technology Services > > 919-754-6280 Office > > 919-274-5446 Cell > > 919-754-6000 ITS Service Desk > > [email protected] > > www.its.state.nc.us > > > > NOTICE: E-mail correspondence to and from this address may be subject to > the North Carolina Public Records Law and may be disclosed to third parties > by an authorized state official. > > > > *From:* Fereydoon Mallahi Karai [mailto:[email protected]] > *Sent:* Thursday, July 16, 2015 3:32 PM > *To:* spectrum > *Subject:* Re: [spectrum] External Application Monitoring > > > > Hello All, > > I wonder if anyone has any idea/hint for this issue. I want spectrum > generates an alarm while the output of the application 'vport_used.pl' > violates a defined value. This application is running on the device and its > output is viewable from Spectrum "Component Details > Information > System > Resources >System> External Application Monitors (UCD-SNMP)". I can also > fetch that output value from the device with running snmpwalk for OID > '.1.3.6.1.4.1.2021.8.1.101.3'. I tried to set a watch but i found no > attribute to set in my watch. > > I will appreciate if you inform me about your comment/idea in this case. > > > Thank you. > > Regards, > > Ferey > > > > On Thu, Jul 9, 2015 at 5:40 PM, Christian Schneider < > [email protected]> wrote: > > Just create a Watch, very easy. > > > > Regards > > Christian Schneider > > Enterprise Service Specialist > > > > 4-tune GmbH > > Sägereistrasse 33 > > CH-8152 Glattbrugg > > > > Tel +41 71 930 07 00 > > Fax +41 71 930 07 01 > > Mob +41 79 418 45 42 > > Mail [email protected] > > > Am 09.07.2015 um 22:22 schrieb Fereydoon Mallahi Karai <[email protected] > >: > > Hello, > > I have added a device in Spectrum and want Spectrum to generate an alarm > while the contents of an application which is on the device and i can see > that application in "Component Details > Information > System Resources > >System> External Application Monitors (UCD-SNMP)" exceeds the defined > threshold. I want to know if i can define thresholds and generate alarms > based on the output of that application in Spectrum. > > Please inform me if you have any idea. > > Thank you. > > Regards, > > Ferey > > > > > - --To unsubscribe from spectrum, send email to [email protected] with > the body: unsubscribe spectrum [email protected] > > > - --To unsubscribe from spectrum, send email to [email protected] with > the body: unsubscribe spectrum [email protected] > > > > - --To unsubscribe from spectrum, send email to [email protected] with > the body: unsubscribe spectrum [email protected] > > --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
