Hi If you are only interested in the network I would suggest setting things up the other way around ie disable port alarms as default and then use a policy to set switch uplink ports to generate alarms. Regards Stephen.
From: Schneider Christian [mailto:[email protected]] Sent: 01 February 2016 15:35 To: spectrum Subject: [spectrum] Not interested in Port-down alarms where Servers are connected Hi, I know we had this in the past but did not find my notes on that. Here is the challenge: Many many switches and routers in the Landscape which produce link-down alarms if the connected server on a switch-port is going down. As we are running the network, we are not interested if the server guys are playing around with the servers and would like to not getting a link-down alarm. Any hints? Kind regards, Christian Schneider Enterprise Service Specialist 4-tune GmbH Sägereistrasse 33 CH-8152 Glattbrugg Mob +41 79 418 45 42 Tel +41 71 930 07 00 Fax +41 71 930 07 01 Mail [email protected]<mailto:[email protected]> www.nexellent.ch<http://www.nexellent.ch> www.4-tune.ch<http://www.4-tune.ch> [cid:[email protected]] * --To unsubscribe from spectrum, send email to [email protected]<mailto:[email protected]> with the body: unsubscribe spectrum [email protected]<mailto:[email protected]> --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
