Andy, >From your USB devices logs it looks like your speedtouch modem is not recognised. In my logs I can see a line with "Alcatel Speedtouch"
Have you already loaded the UHCI module (insmod uhci)? Cheers, Sylvain. - - - Mr Sylvain Martinez BP plc, IST, UK DB Security Analyst > -----Original Message----- > From: Andy Parke [mailto:andy_parke@;btinternet.com] > Sent: 11 November 2002 15:08 > To: [EMAIL PROTECTED] > Subject: [speedtouch] FW: Modem Not Seen By OS. > > > I have been struggling for some time with the installation of > the Alcatel > Speedtouch ADSL Modem on Redhat 7.3. I have a KT3 Ultra2 > motherboard, AMD > Athlon XP 2200+ processor with both USB and USB2 ports. > > After following the instructions "SpeedTouchUSB-HOWTO using Benoit > Papillault's OpenSource drivers" I find that the modem lights > do not light > up. > > At the last stage of the installation, when I get the following error: > > # modem_run -m -f /usr/src/alcaudsl.sys > > I'm sorry, I didn't find your ADSL modem! > Tips: check that you are running this program as root and > your device is > seen by your OS > Linux users : check /proc/bus/usb/devices > BSD users : check your ugen and usb entries in /dev > > Furthermore when I plug in the modem I receive the console message: > > hub.c: Cannot enable port 1 of hub 1, disabling port. > hub.c: Maybe the USB cable is bad? > > It seems that my device is not seen by Linux. What can I do > to fix this? > > Some useful data is shown below: > > # uname -a > Linux localhost.localdomain 2.4.18-3 #1 Thu Apr 18 07:32:41 > EDT 2002 i686 > unknown > > # pppd -V > pppd: unrecognized option '-V' > pppd version 2.4.1 > > # modem_run --help > modem_run version 1.1: $ > > vpi/vci 0, 38 > > # lsmod > Module Size Used by Tainted: P > n_hdlc 7264 0 (unused) > ppp_synctty 6656 0 (unused) > ppp_generic 24140 0 [ppp_synctty] > slhc 6508 0 [ppp_generic] > soundcore 6692 0 (autoclean) > agpgart 39456 3 (autoclean) > NVdriver 1150016 10 (autoclean) > binfmt_misc 7556 1 > autofs 12132 0 (autoclean) (unused) > ipchains 43528 3 > ide-scsi 9664 0 > scsi_mod 108608 1 [ide-scsi] > ide-cd 30272 0 > cdrom 32224 0 [ide-cd] > ehci-hcd 19520 0 (unused) > usb-uhci 24452 0 (unused) > usbcore 73216 1 [ehci-hcd usb-uhci] > ext3 67136 2 > jbd 49400 2 [ext3] > > # cd /proc/bus/usb > # ls -la > total 0 > dr-xr-xr-x 1 root root 0 Nov 7 11:51 . > dr-xr-xr-x 4 root root 0 Nov 7 11:51 .. > dr-xr-xr-x 1 root root 0 Nov 7 11:51 001 > dr-xr-xr-x 1 root root 0 Nov 7 11:51 002 > dr-xr-xr-x 1 root root 0 Nov 7 11:51 003 > dr-xr-xr-x 1 root root 0 Nov 7 11:51 004 > -r--r--r-- 1 root root 0 Nov 7 11:51 devices > -r--r--r-- 1 root root 0 Nov 7 11:51 drivers > > # cat devices > T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 2.40 > S: Manufacturer=Linux 2.4.18-3 ehci-hcd > S: Product=PCI device 1106:3104 (VIA Technologies, Inc.) > S: SerialNumber=00:10.3 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl= 12ms > T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > S: Product=USB UHCI Root Hub > S: SerialNumber=dc00 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > S: Product=USB UHCI Root Hub > S: SerialNumber=e000 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > S: Product=USB UHCI Root Hub > S: SerialNumber=e400 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > > # cat /proc/pci > PCI devices found: > Bus 0, device 0, function 0: > Host bridge: VIA Technologies, Inc. VT8367 [KT266] (rev 0). > Master Capable. Latency=8. > Prefetchable 32 bit memory at 0xe0000000 [0xe7ffffff]. > Bus 0, device 1, function 0: > PCI bridge: VIA Technologies, Inc. VT8367 [KT266 AGP] (rev 0). > Master Capable. No bursts. Min Gnt=12. > Bus 0, device 7, function 0: > Communication controller: PCI device 8086:1040 (Intel > Corp.) (rev 0). > IRQ 10. > Master Capable. Latency=32. > Non-prefetchable 32 bit memory at 0xdfc00000 [0xdfffffff]. > Bus 0, device 8, function 0: > Multimedia audio controller: PCI device 1102:0004 > (Creative Labs) (rev > 3). > IRQ 5. > Master Capable. Latency=32. Min Gnt=2.Max Lat=20. > I/O at 0xe800 [0xe81f]. > Bus 0, device 8, function 1: > Input device controller: PCI device 1102:7003 (Creative > Labs) (rev 3). > Master Capable. Latency=32. > I/O at 0xec00 [0xec07]. > Bus 0, device 8, function 2: > FireWire (IEEE 1394): PCI device 1102:4001 (Creative > Labs) (rev 0). > IRQ 11. > Master Capable. Latency=32. Min Gnt=2.Max Lat=4. > Non-prefetchable 32 bit memory at 0xdfbff800 [0xdfbfffff]. > Non-prefetchable 32 bit memory at 0xdfbf8000 [0xdfbfbfff]. > Bus 0, device 16, function 2: > USB Controller: VIA Technologies, Inc. UHCI USB (#3) (rev 128). > IRQ 10. > Master Capable. Latency=32. > I/O at 0xe400 [0xe41f]. > Bus 0, device 16, function 1: > USB Controller: VIA Technologies, Inc. UHCI USB (#2) (rev 128). > IRQ 11. > Master Capable. Latency=32. > I/O at 0xe000 [0xe01f]. > Bus 0, device 16, function 0: > USB Controller: VIA Technologies, Inc. UHCI USB (rev 128). > IRQ 11. > Master Capable. Latency=32. > I/O at 0xdc00 [0xdc1f]. > Bus 0, device 16, function 3: > USB Controller: PCI device 1106:3104 (VIA Technologies, > Inc.) (rev 130). > IRQ 5. > Master Capable. Latency=32. > Non-prefetchable 32 bit memory at 0xdfbff700 [0xdfbff7ff]. > Bus 0, device 17, function 0: > ISA bridge: PCI device 1106:3177 (VIA Technologies, Inc.) (rev 0). > Bus 0, device 17, function 1: > IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 6). > IRQ 14. > Master Capable. Latency=32. > I/O at 0xfc00 [0xfc0f]. > Bus 1, device 0, function 0: > VGA compatible controller: PCI device 10de:0250 (nVidia > Corporation) > (rev 163). > IRQ 11. > Master Capable. Latency=248. Min Gnt=5.Max Lat=1. > Non-prefetchable 32 bit memory at 0xde000000 [0xdeffffff]. > Prefetchable 32 bit memory at 0xd0000000 [0xd7ffffff]. > Prefetchable 32 bit memory at 0xdd480000 [0xdd4fffff]. > > > Thanks in advance, > > Andy > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB > Pour se d�sinscrire : mailto:speedtouch-request@;ml.free.fr?subject=unsubscribe Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:speedtouch-request@;ml.free.fr?subject=unsubscribe
