You could try removing the rather experimental ehci-hcd module before you plug the modem in - rmmod ehci-hcd. This is only needed for USB 2.0 support - which the modem isn't.
Regards, Frans -----Original Message----- From: [EMAIL PROTECTED] [mailto:speedtouch-owner@;ml.free.fr] On Behalf Of Andy Parke Sent: 11 November 2002 15:08 To: [EMAIL PROTECTED] Subject: [speedtouch] FW: Modem Not Seen By OS. I have been struggling for some time with the installation of the Alcatel Speedtouch ADSL Modem on Redhat 7.3. I have a KT3 Ultra2 motherboard, AMD Athlon XP 2200+ processor with both USB and USB2 ports. After following the instructions "SpeedTouchUSB-HOWTO using Benoit Papillault's OpenSource drivers" I find that the modem lights do not light up. At the last stage of the installation, when I get the following error: # modem_run -m -f /usr/src/alcaudsl.sys I'm sorry, I didn't find your ADSL modem! Tips: check that you are running this program as root and your device is seen by your OS Linux users : check /proc/bus/usb/devices BSD users : check your ugen and usb entries in /dev Furthermore when I plug in the modem I receive the console message: hub.c: Cannot enable port 1 of hub 1, disabling port. hub.c: Maybe the USB cable is bad? It seems that my device is not seen by Linux. What can I do to fix this? Some useful data is shown below: # uname -a Linux localhost.localdomain 2.4.18-3 #1 Thu Apr 18 07:32:41 EDT 2002 i686 unknown # pppd -V pppd: unrecognized option '-V' pppd version 2.4.1 # modem_run --help modem_run version 1.1: $ vpi/vci 0, 38 # lsmod Module Size Used by Tainted: P n_hdlc 7264 0 (unused) ppp_synctty 6656 0 (unused) ppp_generic 24140 0 [ppp_synctty] slhc 6508 0 [ppp_generic] soundcore 6692 0 (autoclean) agpgart 39456 3 (autoclean) NVdriver 1150016 10 (autoclean) binfmt_misc 7556 1 autofs 12132 0 (autoclean) (unused) ipchains 43528 3 ide-scsi 9664 0 scsi_mod 108608 1 [ide-scsi] ide-cd 30272 0 cdrom 32224 0 [ide-cd] ehci-hcd 19520 0 (unused) usb-uhci 24452 0 (unused) usbcore 73216 1 [ehci-hcd usb-uhci] ext3 67136 2 jbd 49400 2 [ext3] # cd /proc/bus/usb # ls -la total 0 dr-xr-xr-x 1 root root 0 Nov 7 11:51 . dr-xr-xr-x 4 root root 0 Nov 7 11:51 .. dr-xr-xr-x 1 root root 0 Nov 7 11:51 001 dr-xr-xr-x 1 root root 0 Nov 7 11:51 002 dr-xr-xr-x 1 root root 0 Nov 7 11:51 003 dr-xr-xr-x 1 root root 0 Nov 7 11:51 004 -r--r--r-- 1 root root 0 Nov 7 11:51 devices -r--r--r-- 1 root root 0 Nov 7 11:51 drivers # cat devices T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.40 S: Manufacturer=Linux 2.4.18-3 ehci-hcd S: Product=PCI device 1106:3104 (VIA Technologies, Inc.) S: SerialNumber=00:10.3 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl= 12ms T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=dc00 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=e000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=e400 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms # cat /proc/pci PCI devices found: Bus 0, device 0, function 0: Host bridge: VIA Technologies, Inc. VT8367 [KT266] (rev 0). Master Capable. Latency=8. Prefetchable 32 bit memory at 0xe0000000 [0xe7ffffff]. Bus 0, device 1, function 0: PCI bridge: VIA Technologies, Inc. VT8367 [KT266 AGP] (rev 0). Master Capable. No bursts. Min Gnt=12. Bus 0, device 7, function 0: Communication controller: PCI device 8086:1040 (Intel Corp.) (rev 0). IRQ 10. Master Capable. Latency=32. Non-prefetchable 32 bit memory at 0xdfc00000 [0xdfffffff]. Bus 0, device 8, function 0: Multimedia audio controller: PCI device 1102:0004 (Creative Labs) (rev 3). IRQ 5. Master Capable. Latency=32. Min Gnt=2.Max Lat=20. I/O at 0xe800 [0xe81f]. Bus 0, device 8, function 1: Input device controller: PCI device 1102:7003 (Creative Labs) (rev 3). Master Capable. Latency=32. I/O at 0xec00 [0xec07]. Bus 0, device 8, function 2: FireWire (IEEE 1394): PCI device 1102:4001 (Creative Labs) (rev 0). IRQ 11. Master Capable. Latency=32. Min Gnt=2.Max Lat=4. Non-prefetchable 32 bit memory at 0xdfbff800 [0xdfbfffff]. Non-prefetchable 32 bit memory at 0xdfbf8000 [0xdfbfbfff]. Bus 0, device 16, function 2: USB Controller: VIA Technologies, Inc. UHCI USB (#3) (rev 128). IRQ 10. Master Capable. Latency=32. I/O at 0xe400 [0xe41f]. Bus 0, device 16, function 1: USB Controller: VIA Technologies, Inc. UHCI USB (#2) (rev 128). IRQ 11. Master Capable. Latency=32. I/O at 0xe000 [0xe01f]. Bus 0, device 16, function 0: USB Controller: VIA Technologies, Inc. UHCI USB (rev 128). IRQ 11. Master Capable. Latency=32. I/O at 0xdc00 [0xdc1f]. Bus 0, device 16, function 3: USB Controller: PCI device 1106:3104 (VIA Technologies, Inc.) (rev 130). IRQ 5. Master Capable. Latency=32. Non-prefetchable 32 bit memory at 0xdfbff700 [0xdfbff7ff]. Bus 0, device 17, function 0: ISA bridge: PCI device 1106:3177 (VIA Technologies, Inc.) (rev 0). Bus 0, device 17, function 1: IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 6). IRQ 14. Master Capable. Latency=32. I/O at 0xfc00 [0xfc0f]. Bus 1, device 0, function 0: VGA compatible controller: PCI device 10de:0250 (nVidia Corporation) (rev 163). IRQ 11. Master Capable. Latency=248. Min Gnt=5.Max Lat=1. Non-prefetchable 32 bit memory at 0xde000000 [0xdeffffff]. Prefetchable 32 bit memory at 0xd0000000 [0xd7ffffff]. Prefetchable 32 bit memory at 0xdd480000 [0xdd4fffff]. Thanks in advance, Andy Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:speedtouch-request@;ml.free.fr?subject=unsubscribe Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:speedtouch-request@;ml.free.fr?subject=unsubscribe
