OS: OpenBSD 3.2 Modem: USB Speedtouch (grey stingray) connect via usb pci controller card
Hey guys, I've been messing with this for a few weeks off and on and can't find any sort of resolution.. So i figured i'd let you guys have a stab at it... Ok, first off the modem drivers and management systems are all installed fine and working properly. I can access the net at full speeds and route my entire lan through it. My issue is, after about an hour or so of idle time the system goes to sleep, making the monitor power down etc.. like your standard energy star features.. But at this exact instance it kills my ppp connection dead and it can not be restarted with out rebooting the system. One of the first things that came to mind here was the bios.. This box is running on a old p100 IBM box (Bios dated 12/20/1995), the only thing i can find that seems to be related to this at all is a "Standby Time-out" in Rapid Resume settings that is set to 20 (sec/min? im unsure), but the system doesn't sleep unless its been idle an hour or so.. So im not sure here.. Here are some log msgs from each stage: ####################### # Initial Connection to ISP: ####################### /var/log/messages -Mar 30 06:21:25 Toker modem_run[11212]: modem_run version 1.2-beta1 started by ******* uid 0 -Mar 30 06:21:45 Toker modem_run[11212]: ADSL synchronization has been obtained -Mar 30 06:21:45 Toker modem_run[11212]: ADSL line is up (1472 kbit/s down | 256 kbit/s up) -Mar 30 06:22:28 Toker ppp[3253]: tun0: Warning: ff02::%tun0/32: Change route failed: errno: Undefined error: 0 var/log/ppp.log -Mar 30 06:22:28 Toker ppp[27852]: tun0: Phase: Parent: PPP enabled -Mar 30 07:56:45 Toker ppp[3253]: tun0: Warning: ff02::%tun0/32: Change route failed: errno: Undefined error: 0 All is good here, im connected and on my way. The warnings are something that seems common among openbsd/speedtouch users.. I know its just dealing with a ipv6 call.. and it doesnt effect my connection at all it seems, i just see it when ever the ppp link connects or disconnects. ####################### # An hour or so goes by.. system # goes to sleep, ppp connection is lost ####################### /var/log/messages -Mar 30 07:56:45 Toker ppp[3253]: tun0: Warning: ff02::%tun0/32: Change route failed: errno: Undefined error: 0 /var/log/ppp.log -Mar 30 07:56:45 Toker ppp[3253]: tun0: IPCP: deflink: LayerDown: 68.17.136.84 -Mar 30 07:56:45 Toker ppp[3253]: tun0: IPCP: Using trigger address 0.0.0.0 -Mar 30 07:56:45 Toker ppp[3253]: tun0: IPCP: deflink: State change Opened --> Starting -Mar 30 07:56:45 Toker ppp[3253]: tun0: IPCP: deflink: LayerFinish. -Mar 30 07:56:45 Toker ppp[3253]: tun0: IPCP: Connect time: 5657 secs: 3497748 octets in, 505889 octets out -Mar 30 07:56:45 Toker ppp[3253]: tun0: IPCP: 6264 packets in, 5776 packets out -Mar 30 07:56:45 Toker ppp[3253]: tun0: IPCP: total 707 bytes/sec, peak 50472 bytes/sec on Sun Mar 30 06:24:32 2003 -Mar 30 07:56:45 Toker ppp[3253]: tun0: IPCP: deflink: State change Starting --> Initial -Mar 30 07:56:45 Toker ppp[3253]: tun0: Phase: bundle: Terminate -Mar 30 07:56:45 Toker ppp[3253]: tun0: Phase: deflink: Disconnected! -Mar 30 07:56:45 Toker ppp[3253]: tun0: Phase: deflink: lcp -> logout -Mar 30 07:56:45 Toker ppp[3253]: tun0: Phase: deflink: Disconnected! -Mar 30 07:56:45 Toker ppp[3253]: tun0: Phase: deflink: logout -> hangup -Mar 30 07:56:45 Toker ppp[3253]: tun0: Phase: deflink: Connect time: 5673 secs: 3522759 octets in, 554114 octets out -Mar 30 07:56:45 Toker ppp[3253]: tun0: Phase: deflink: 7586 packets in, 7100 packets out -Mar 30 07:56:45 Toker ppp[3253]: tun0: Phase: total 718 bytes/sec, peak 50591 bytes/sec on Sun Mar 30 06:24:32 2003 -Mar 30 07:56:45 Toker ppp[3253]: tun0: Phase: deflink: HUPing 22564 -Mar 30 07:56:45 Toker ppp[3253]: tun0: Phase: deflink: hangup -> closed -Mar 30 07:56:45 Toker ppp[3253]: tun0: Phase: bundle: Dead -Mar 30 07:56:45 Toker ppp[3253]: tun0: Phase: PPP Terminated (normal). ####################### # Then i try to reconnect ppp.... ####################### bash-2.05b# ppp -background adsl Working in background mode Using interface: tun0 Warning: Add! route failed: 0.0.0.0/0: errno: No such process Child failed (errdead) bash-2.05b# /var/log/messages -Mar 30 07:59:49 Toker ppp[30323]: tun0: Warning: Add! route failed: 0.0.0.0/0: errno: No such process /var/log/ppp.log -Mar 30 07:59:49 Toker ppp[30323]: Phase: Using interface: tun0 -Mar 30 07:59:49 Toker ppp[30323]: Phase: deflink: Created in closed state -Mar 30 07:59:49 Toker ppp[30323]: tun0: Command: adsl: set authname ******** -Mar 30 07:59:49 Toker ppp[30323]: tun0: Command: adsl: set authkey ******** -Mar 30 07:59:49 Toker ppp[30323]: tun0: Command: adsl: set device !/usr/local/sbin/pppoa2 -vpi 8 -vci 35 -v 1 -Mar 30 07:59:49 Toker ppp[30323]: tun0: Command: adsl: set speed sync -Mar 30 07:59:49 Toker ppp[30323]: tun0: Command: adsl: set timeout 0 -Mar 30 07:59:49 Toker ppp[30323]: tun0: Command: adsl: enable lqr -Mar 30 07:59:49 Toker ppp[30323]: tun0: Command: adsl: set lqrperiod 5 -Mar 30 07:59:49 Toker ppp[30323]: tun0: Command: adsl: set redial 15 10000 -Mar 30 07:59:49 Toker ppp[30323]: tun0: Command: adsl: set dial -Mar 30 07:59:49 Toker ppp[30323]: tun0: Command: adsl: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 -Mar 30 07:59:49 Toker ppp[30323]: tun0: Command: adsl: add! default HISADDR -Mar 30 07:59:49 Toker ppp[30323]: tun0: Warning: Add! route failed: 0.0.0.0/0: errno: No such process -Mar 30 07:59:49 Toker ppp[30323]: tun0: Command: adsl: enable dns -Mar 30 07:59:49 Toker ppp[30323]: tun0: Command: adsl: nat enable yes -Mar 30 07:59:49 Toker ppp[23509]: tun0: Phase: PPP Started (background mode). -Mar 30 07:59:49 Toker ppp[23509]: tun0: Phase: bundle: Establish -Mar 30 07:59:49 Toker ppp[23509]: tun0: Phase: deflink: closed -> opening -Mar 30 07:59:49 Toker ppp[23509]: tun0: Phase: deflink: Connected! -Mar 30 07:59:49 Toker ppp[23509]: tun0: Phase: deflink: opening -> dial -Mar 30 07:59:49 Toker ppp[23509]: tun0: Chat: deflink: Dial attempt 1 of 10000 -Mar 30 07:59:49 Toker ppp[23509]: tun0: Phase: deflink: dial -> carrier -Mar 30 07:59:49 Toker ppp[23509]: tun0: Phase: deflink: carrier -> login -Mar 30 07:59:49 Toker ppp[23509]: tun0: Phase: deflink: login -> lcp -Mar 30 08:00:06 Toker ppp[23509]: tun0: Phase: deflink: Disconnected! -Mar 30 08:00:06 Toker ppp[23509]: tun0: Phase: deflink: lcp -> logout -Mar 30 08:00:06 Toker ppp[23509]: tun0: Phase: deflink: logout -> hangup -Mar 30 08:00:06 Toker ppp[23509]: tun0: Phase: deflink: Disconnected! -Mar 30 08:00:06 Toker ppp[23509]: tun0: Phase: deflink: Connect time: 17 secs: 0 octets in, 130 octets out -Mar 30 08:00:06 Toker ppp[23509]: tun0: Phase: deflink: 0 packets in, 5 packets out -Mar 30 08:00:06 Toker ppp[23509]: tun0: Phase: total 7 bytes/sec, peak 10 bytes/sec on Sun Mar 30 07:59:53 2003 -Mar 30 08:00:06 Toker ppp[23509]: tun0: Phase: deflink: HUPing 6174 -Mar 30 08:00:06 Toker ppp[23509]: tun0: Phase: deflink: hangup -> closed -Mar 30 08:00:06 Toker ppp[23509]: tun0: Phase: bundle: Dead -Mar 30 08:00:06 Toker ppp[23509]: tun0: Phase: PPP Terminated (normal). -Mar 30 08:00:06 Toker ppp[23509]: tun0: Chat: Parent notified of failure -Mar 30 08:00:06 Toker ppp[30323]: tun0: Phase: Parent: Child failed (errdead) ####################### # I kill modem_run and try to relaunch it ####################### bash-2.05b# /usr/local/sbin/modem_run -f /usr/local/libdata/mgmt.o -m USB_SET_ALTINTERFACE: Invalid argument bash-2.05b# /var/log/messages -Mar 30 08:02:56 Toker modem_run[3337]: modem_run version 1.2-beta1 started by ******* uid 0 -Mar 30 08:03:28 Toker modem_run[3337]: pusb_set_interface So now ppp is dead, modem_run is dead.. i reboot and bring it all back up.. Any help on this issue would be greatly appreciated. Thanks in advance.. --Chris W. Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
