What doe you mean by 'this is my mistake'? Is everything okay now? Network running?
wito wrote: >thanksforanswer, >this is my mistake: the output of "ifconfig" is that: >lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > UP LOOPBACK RUNNING MTU:16436 Metric:1 > RX packets:8 errors:0 dropped:0 overruns:0 frame:0 > TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:560 (560.0 b) TX bytes:560 (560.0 b) > >ppp0 Link encap:Point-to-Point Protocol > inet addr:62.47.180.101 P-t-P:172.19.93.137 Mask:255.255.255.255 > UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 > RX packets:186 errors:0 dropped:0 overruns:0 frame:0 > TX packets:113 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:3 > RX bytes:11317 (11.0 KiB) TX bytes:8957 (8.7 KiB) > >And my second mistake: I thought a complete Debian distro contains packages >AND the related source files on CDs?!?! isn't? > > >-----Ursprüngliche Nachricht----- >Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] >Auftrag von Ok Overbeek (mz) >Gesendet: Freitag, 11. Juli 2003 09:22 >An: [EMAIL PROTECTED] >Betreff: [speedtouch] Re: ping impossible > > > >A little search on ping leads to http://ftp.arl.mil/~mike/ping.html by >the original creator (source included)! >And just for my curiosity: what does the output of 'ifconfig' look like? > >Ok > >wito wrote: > > > >>I’ve had a working speedtouch – pppoa3 connection. >>After re-installing Woody & Sarge, installing GNOME and re-compiling the >>kernel 2.4.20-6, the system works fine BUT the connection doesn’t work at >>all. >> >>In order to avoid Mr. Gomez’ prompt note: Read the FAQ….. I assure that I >>did so. I have the same ppp-configuration as before the re-installation, >> >> >the > > >>same options, a good /etc/resolv.conf file linked to /etc/ppp/resolv.conv >>etc. (I hope so) >> >>The big difference between the old and the new system installation: GNOME >> >> >is > > >>working well now. >> >>The behaviour of my connection is as follows: >>1) the syslog entries look good >>2) modem_run seems to be OK >>3) pppoa3 runs in 4 or 5 tasks >>4) using the debug options I can see: pppd is living >>5) the registration (chap) to my ISP is OK >>6) pppd does recognize the nameserver declarations in my resolv.conf file >>7) “ifconfig” and “route –n” both deliver good results >>8) All seems to be OK – I cannot find any suspicious problem line in >> >> >syslog… > > >>9) I know 4 IP addresses in my PC’s environment: >> 2 nameserver IP’s (defined by myself in resolv.conv) and >> 2 IP’s given to me by “route –n” (local IP and gateway-IP?) >>10) I can ping this 4 IP’s – this works fine >>11) But I cannot ping anything else: >> neither symbolic names (www.linux.org) nor the appropriate IP-addresses >>12) “nslookup” resp. “host” return connection timeout in all (in all) cases >> >>It looks like the connection between my PC, my modem (and propably to my >>ISP??) is good – but behind my ISP the line is interrupted or so…. >> >>I found a task in the speedtouch mailing list’s archive from March 2003 >>describing the same situation: no answers exist to this request. So I >> >> >guess > > >>nobody can offer a explanation / solution to this / my problem. >>I found an other task from 14.th June 2003 with a similar problem: but the >>people discuss in Dutch - and so I will never find aout the solution. >> >>I don’t understand the system’s behaviour - because I don’t understand the >>way the “ping” process does work. I don’t know neither their tasks nor the >>communication flow between “ping”, “pppd” and “pppoa3”. >> >>And so I tried to get the source files for “ping” etc - and this is my next >>problem and I hope someone can help me here: >>I have 7 resp. 8 CD’s for Woody & Sarge. >>I know /etc/apt/sources.list >>Using “dselect” & “dpkg –l” I discovered “netlink” as ping’s home-package – >>but where can I get the appropriated source files? >>I guess at least 1 of 8 CDs should cover the source files – but I'm unable >>to find them.... >> >>So I'm sitting here behind a huge wall and hope someone give me a hint >> >> >where > > >>I could get “ping”-sources from? >>Thank you for attention >> >> >> >>Liste de diffusion modem ALCATEL SpeedTouch USB >>Pour se désinscrire : >> >> >mailto:[EMAIL PROTECTED] > > >> >> >> >> >> > > > > >Liste de diffusion modem ALCATEL SpeedTouch USB >Pour se désinscrire : >mailto:[EMAIL PROTECTED] > > > > > >Liste de diffusion modem ALCATEL SpeedTouch USB >Pour se désinscrire : mailto:[EMAIL PROTECTED] > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
