Hi, Not sure if its a know problem but I'm using the same driver as you and I get the same thing.
Jan 16 09:56:09 linux kernel: usb_control/bulk_msg: timeout Jan 16 09:56:09 linux kernel: usbdevfs: USBDEVFS_BULK failed dev 3 ep 0x7 len 106 ret -110 Jan 16 09:56:11 linux pppoa3[3622]: Cell had wrong VPI(3013)/VCI(12384) (OAM?) PTI=0x00 Jan 16 09:56:11 linux pppoa3[3622]: Cell had wrong VPI(3295)/VCI(47422) (OAM?) PTI=0x05 Jan 16 09:56:11 linux pppoa3[3622]: Cell had wrong VPI(3717)/VCI(13290) (OAM?) PTI=0x04 Jan 16 09:56:11 linux pppoa3[3622]: Cell had wrong VPI(1433)/VCI(27629) (OAM?) PTI=0x00 Jan 16 09:56:11 linux pppoa3[3622]: CRC error in AAL5 frame Although the connection doesnt become unusable, only while the usb_control/bulk_msg: timeout messages are appearing but they only last for a min or so (still very annoying) and then the conenction returns to normal. Chris. ----- Original Message ----- From: "Stephen Illingworth" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, January 09, 2004 4:39 PM Subject: [speedtouch] VPI/VCI problems > Hello, > > I recently upgraded to beta3 and am now experiencing errors that never occurred with beta1 (I skipped > beta2). The errors relate to incoming ATM cells with wrong path/circuit identifiers. For example, > > Cell had wrong VPI(1150)/VCI(62309) (OAM?) PTI=0x03 > > After several hours, syslog reports that a cell has been received with with a VPI and VCI of 0 and > the connection becomes unusable. Is this a known problem? > > Regards, Steve. > > > Liste de diffusion modem ALCATEL SpeedTouch USB > Pour se désinscrire : mailto:[EMAIL PROTECTED] > > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]