Duncan Sands a écrit : >>Does this mean that the errors/warnings can be ignored? > > > These don't look good > > >> May 23 08:07:29 localhost kernel: usb 1-2: control timeout on ep0in >> May 23 08:07:29 localhost kernel: hub 1-2:1.0: config failed, can't >> read hub descriptor (err -110) > > > but these are fine > > >> May 23 08:07:29 localhost kernel: usb 2-2.2: usbfs: interface 1 >> claimed while 'modem_run' sets config #1 >> May 23 08:07:29 localhost kernel: usb 2-2.2: usbfs: interface 2 >> claimed while 'modem_run' sets config #1 >> May 23 08:07:29 localhost kernel: usb 2-2.2: bulk timeout on ep5in >> May 23 08:07:29 localhost kernel: usbfs: USBDEVFS_BULK failed >> dev 3 ep 0x85 len 512 ret -110 >> May 23 08:07:29 localhost kernel: usb 2-2.2: usbfs: interface 0 >> claimed while 'modem_run' sets config #1 >> May 23 08:07:29 localhost kernel: usb 2-2.2: usbfs: interface 1 >> claimed while 'modem_run' sets config #1 >> May 23 08:07:29 localhost kernel: usb 2-2.2: usbfs: interface 2 >> claimed while 'modem_run' sets config #1 >> May 23 08:07:47 localhost kernel: usbfs: process 1608 (modem_run) >> did not claim interface 0 before use >>Is there a possibility to solve these warnings? > > > actually there is, but you're going to have to wait a bit. You can get > rid of some of them by removing the (pointless) set_configuration bits > in modem_run.c
Those modification have been made in modem_run, pppoa2 and pppoa3 in the CVS repository of the speedtouch usermode driver. Look at http://sourceforge.net/cvs/?group_id=32758 for instructions on accessing CVS. Benoit PAPILLAULT Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
