----- Original Message ----- From: "Sergio Freire" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, June 14, 2004 12:00 AM Subject: [speedtouch] disconnect - woken by sem post error
> > Duncan, > I already have that... > This is the command being executed: pppoa3 -b -e 1 -m 1 -c -vpi 0 -vci > 35 > Anyone else has this "woken by sem post event -> exiting" error and has > a clue why its happening? I saw many people complaining on forums about > this. > I think its because of kernel 2.6.x... this did not happen on 2.4.xx > Regards > Sergio Freire > It is not specific to kernel 2.6 branch Don't you have the hub reset like that on kernel 2.4.26? Jun 11 22:15:23 ipcop pppoa3[3900]: Error reading usb urb Jun 11 22:15:23 ipcop pppoa3[3896]: Woken by a sem_post event -> Exiting Jun 11 22:15:23 ipcop pppoa3[3896]: Read from usb Canceled Jun 11 22:15:23 ipcop pppoa3[3896]: Write to usb Canceled Jun 11 22:15:23 ipcop pppoa3[3896]: Exiting Jun 11 22:15:23 ipcop kernel: usb-uhci.c: interrupt, status 3, frame# 2025 Jun 11 22:15:23 ipcop kernel: hub.c: already running port 2 disabled by hub (EMI?), re-enabling... Jun 11 22:15:23 ipcop pppd[3895]: Script /usr/sbin/pppoa3 -c -m 1 -vpi 8 -vci 35 finished (pid 3896), status = 0xff Jun 11 22:15:23 ipcop modem_run[3390]: Error reading interrupts Jun 11 22:15:23 ipcop pppd[3895]: Modem hangup Jun 11 22:15:23 ipcop kernel: usb.c: USB disconnect on device 00:07.2-2 address 4 Jun 11 22:15:24 ipcop modem_run[3390]: [monitoring report] ADSL link went down Jun 11 22:15:24 ipcop pppd[3895]: Script /etc/ppp/ip-down started (pid 7640) Jun 11 22:15:24 ipcop pppd[3895]: Connection terminated. Jun 11 22:15:24 ipcop pppd[3895]: Connect time 800.6 minutes. Jun 11 22:15:24 ipcop pppd[3895]: Sent 15149163 bytes, received 22205939 bytes. Jun 11 22:15:24 ipcop kernel: hub.c: new USB device 00:07.2-2, assigned address 5 Sometime I am sure it is a power issue. It don't know if it is always the case. Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]