btw I have this working now via the eth but I would still like to use this device on USB and free the eth on the gateway for other use.
As an aside the line needed to auto load the pppoe module seems to be plugin rp-pppoe.so eth1 or at least thats what pppoeconf put it as. > Moreover, the speedtouch does an automatic detection of the proper > firmware to use with the "Rev=" field. We currently recognize "Rev= > 0.00", "Rev= 2.00" and "Rev= 4.00". So obviously, some work is needed to > make your modem work. As someone who hasn't played with the driver, can you give a little more detail on what "work" is needed here so I can look into it further. > Would you send the whole content of /proc/bus/usb/devices? T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.8v1 uhci_hcd S: Product=Intel Corp. 82371AB/EB/MB PIIX4 USB S: SerialNumber=0000:00:07.2 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=06b9 ProdID=4061 Rev= 3.00 S: Manufacturer=ALCATEL S: Product=SpeedTouch 500 Series S: SerialNumber=000E5016BC41 C:* #Ifs= 3 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=50ms I: If#= 1 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=00 Prot=00 Driver=speedtch I: If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=speedtch E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=speedtch E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=88(I) Atr=01(Isoc) MxPS= 512 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=speedtch E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=88(I) Atr=01(Isoc) MxPS= 768 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=speedtch E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=88(I) Atr=01(Isoc) MxPS= 960 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 8 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 8 Ivl=0ms Best Regards, Lee Sanders Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
