Max Stricker wrote: > Hi Dunc, > > thanks for your answer! > Thats what i get: > server ~ # /usr/sbin/pppd call speedtch debug > Plugin pppoatm.so loaded. > In pppoatm_process_extra_options > In options_for_pppoatm > In pppoatm_check_options > In pppoatm_connect > In pppoatm_establish_ppp > using channel 8 > Using interface ppp0 > Connect: ppp0 <--> 8.35 > In pppoatm_do_send_config > In pppoatm_recv_config > sent [LCP ConfReq id=0x1 <magic 0x7d4e692e>] > rcvd [LCP ConfReq id=0x1 <auth pap> <magic 0xc41281ca>] > No auth is possible > sent [LCP ConfRej id=0x1 <auth pap>] > rcvd [LCP ConfReq id=0x2 <auth pap> <magic 0xc41281ca>] > No auth is possible > sent [LCP ConfRej id=0x2 <auth pap>] > rcvd [LCP ConfReq id=0x3 <auth pap> <magic 0xc41281ca>] > No auth is possible > sent [LCP ConfRej id=0x3 <auth pap>] > rcvd [LCP ConfReq id=0x4 <auth pap> <magic 0xc41281ca>] > No auth is possible > sent [LCP ConfRej id=0x4 <auth pap>] > rcvd [LCP ConfReq id=0x5 <auth pap> <magic 0xc41281ca>] > No auth is possible > sent [LCP ConfRej id=0x5 <auth pap>] > rcvd [LCP ConfReq id=0x6 <auth pap> <magic 0xc41281ca>] > No auth is possible > sent [LCP ConfRej id=0x6 <auth pap>] > Terminating on signal 2. > sent [LCP TermReq id=0x2 "User request"] > rcvd [LCP ConfReq id=0x7 <auth pap> <magic 0xc41281ca>] > rcvd [LCP TermAck id=0x2] > Connection terminated. > In pppoatm_disestablish_ppp > In pppoatm_disconnect > In pppoatm_cleanup > In pppoatm_close > In pppoatm_cleanup > In pppoatm_close > server ~ # > > So i think that anything is wrong with my /etc/ppp/pap-secrets. > That's its content: > > # Secrets for authentication using PAP > # client server secret IP addresses > "[EMAIL PROTECTED]" * "mysecretpass" > > I analyzed the pap-secrets.example, and recognized that its not in the > same form, > but I made it like in the how 2. > > Any Ideas? > > Max
Do you definately need PAP and not CHAP? Maybe try copying pap-secrets to chap-secrets? You could even move pap-secrets aside while leaving chap there, in case it is just trying to use the wrong method. What is different about the example file? Cheers, Dunc > > Dunc wrote: > > >>Max Stricker wrote: >> >> >> >>>Helo, >>>yes my ISP is tele2, and they use PPPoA (1483 RFC Bridged), >>>on my windows xp it works with PPPoA, but I want format c and use only >>>linux if >>>my modem runs on it. >>> >>>Max >>> >>> >>> >> >> >>Hi Max, >> >>Do you get any more info if you switch debugging on? >> >>try # pppd call speedtch debug >> >>Cheers, >> >>Dunc >> >> >> >> >>>>Ciao, >>>> >>>>are you sure that tele2 (or whatever your isp is) has a PPPoA >>>>connection? Although I don't know if this is the right question, as we >>>>can see an *attempt* for a ppp connection. >>>> >>>>~marco >>>> >>>>Il giorno sab, 28/01/2006 alle 15.03 +0100, Max Stricker ha scritto: >>>> >>>> >>>> >>>> >>>> >>>> >>>>>Hi, >>>>>I don't know if im right here, because its my 1. post in a mailing list. >>>>>I've followed this how to: >>>>>http://www.linux-usb.org/SpeedTouch/gentoo/index.html >>>>>to get working my Alcatel Speedtouch 330 Rev.4 modem under >>>>>Gentoo. >>>>>I'm a Linux newbee so i can't resolve the error I get without help. >>>>>I have 2 different errors: >>>>>server ~ # /usr/sbin/pppd call speedtch >>>>>Plugin pppoatm.so loaded. >>>>>Using interface ppp0 >>>>>Connect: ppp0 <--> 8.35 >>>>>LCP: timeout sending Config-Requests >>>>>Connection terminated. >>>>> >>>>>and >>>>>server ~ # /usr/sbin/pppd call speedtch >>>>>Plugin pppoatm.so loaded. >>>>>Using interface ppp0 >>>>>Connect: ppp0 <--> 8.35 >>>>>Killed >>>>> >>>>>dmesg says: >>>>>speedtch 2-2:1.0: found stage 1 firmware speedtch-1.bin >>>>>speedtch 2-2:1.0: found stage 2 firmware speedtch-2.bin >>>>>ATM dev 0: ADSL line is synchronising >>>>>ATM dev 0: ADSL line is up (4832 kb/s down | 320 kb/s up) >>>>> >>>>>can anybody help me resolving this (little??) problem? >>>>>I don't know how i get an answer on this post... >>>>>this is my mail-adress : maxstricker [at] tele2 [dot] it >>>>> >>>>>greets from Italy and sorry for my very bad english >>>>>Max >>>>> >>>>> >>>>> >>>>> >>>> >>>> >>>>-- >>>>Email.it, the professional e-mail, gratis per te: http://www.email.it/f >>>> >>>>Sponsor: >>>>Per i progetti che rimandi da tempo, Findomestic ti offre la soluzione >>>>ideale per te, con semplicità e senza anticipi! Clicca e scopri come >>>>Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=3936&d=28-1 >>>> >>>>Liste de diffusion modem ALCATEL SpeedTouch USB >>>>Pour se désinscrire : mailto:[EMAIL PROTECTED] >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>> >>>Liste de diffusion modem ALCATEL SpeedTouch USB >>>Pour se désinscrire : mailto:[EMAIL PROTECTED] >>> >>> >>> >>> >> >> >>Liste de diffusion modem ALCATEL SpeedTouch USB >>Pour se désinscrire : mailto:[EMAIL PROTECTED] >> >> >> >> >> > > > > Liste de diffusion modem ALCATEL SpeedTouch USB > Pour se désinscrire : mailto:[EMAIL PROTECTED] > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]