sorry ot be a pain but where exactly woudl i find this? what filenme shoidl i search for??
ta for your help much approeciated rg Duncan Sands wrote: > Hi, > > >> I have the following: >> >> Speedtouch 330 silver, >> 2 hard drives, one with FC6 adn one with FC5 and Windows. I have just >> isntalled the FC6. >> >> the speedtouch instructions work well but: >> >> If I boot from the FC5 and Winfdows drive all is well >> >> If I boot from the FC6 drive with teh FC5 hard drive PHYSICALLY >> disconnected, all is well >> >> If I make teh FC6 drive the boot disk but leave the other one connected, >> then it fials to initialize, hanging up at 'bringing up interface ppp0'. >> >> Any ideas would be most welcome - diving in and out of my machine >> pulling plugs out is not a very good idea I suspect! >> > > it sounds like a timing issue. It's important not to try to bring up > ppp0 too fast after the modem is discovered by the USB subsystem. Most > scripts (eg: hotplug or boot scripts) have a delay (eg: sleep 10) to > make sure the modem is ready before running pppd. Try increasing the > delay. > > Ciao, > > D. > > Liste de diffusion modem ALCATEL SpeedTouch USB > Pour se dىsinscrire : mailto:[EMAIL PROTECTED] > > > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se dىsinscrire : mailto:[EMAIL PROTECTED]