from the fingers of Duncan Sands on 1/30/2007 11:51 PM: > Actually, now I come to think about it some more I suspect > I know what the problem is. Try doing this (as root): > > rmmod speedtch > modprobe speedtch dl_512_first=1 > > Unplug the modem and plug it back in again. Does it > work? What do you get in your system log? > > It worked! Almost... The modem retrained and dialed in. But neither Firefox or Evolution recognize the connection.
Here is my new syslog: Jan 31 14:49:53 localhost syslogd 1.4.1#17ubuntu7: restart. Jan 31 14:49:53 localhost anacron[4694]: Job `cron.daily' terminated Jan 31 14:49:53 localhost anacron[4694]: Normal exit (1 job run) Jan 31 15:09:53 localhost -- MARK -- Jan 31 15:17:01 localhost /USR/SBIN/CRON[5123]: (root) CMD ( run-parts --report /etc/cron.hourly) Jan 31 15:29:53 localhost -- MARK -- Jan 31 15:49:54 localhost -- MARK -- Jan 31 16:09:54 localhost -- MARK -- Jan 31 16:17:01 localhost /USR/SBIN/CRON[5125]: (root) CMD ( run-parts --report /etc/cron.hourly) Jan 31 16:20:46 localhost kernel: [4300550.857000] usb 1-1.2: new full speed USB device using uhci_hcd and address 5 Jan 31 16:20:47 localhost kernel: [4300551.175000] SCSI subsystem initialized Jan 31 16:20:47 localhost kernel: [4300551.193000] Initializing USB Mass Storage driver... Jan 31 16:20:47 localhost kernel: [4300551.195000] scsi0 : SCSI emulation for USB Mass Storage devices Jan 31 16:20:47 localhost kernel: [4300551.198000] usb-storage: device found at 5 Jan 31 16:20:47 localhost kernel: [4300551.198000] usb-storage: waiting for device to settle before scanning Jan 31 16:20:47 localhost kernel: [4300551.198000] usbcore: registered new driver usb-storage Jan 31 16:20:47 localhost kernel: [4300551.198000] USB Mass Storage support registered. Jan 31 16:20:52 localhost kernel: [4300556.202000] Vendor: Kingston Model: DataTraveler U3 Rev: 6.50 Jan 31 16:20:52 localhost kernel: [4300556.202000] Type: Direct-Access ANSI SCSI revision: 00 Jan 31 16:20:52 localhost kernel: [4300556.206000] Vendor: Kingston Model: DataTraveler U3 Rev: 6.50 Jan 31 16:20:52 localhost kernel: [4300556.206000] Type: CD-ROM ANSI SCSI revision: 00 Jan 31 16:20:52 localhost kernel: [4300556.212000] usb-storage: device scan complete Jan 31 16:20:52 localhost kernel: [4300556.335000] Driver 'sd' needs updating - please use bus_type methods Jan 31 16:20:52 localhost kernel: [4300556.343000] SCSI device sda: 1961695 512-byte hdwr sectors (1004 MB) Jan 31 16:20:52 localhost kernel: [4300556.347000] sda: Write Protect is off Jan 31 16:20:52 localhost kernel: [4300556.347000] sda: Mode Sense: 45 00 00 08 Jan 31 16:20:52 localhost kernel: [4300556.347000] sda: assuming drive cache: write through Jan 31 16:20:52 localhost kernel: [4300556.358000] SCSI device sda: 1961695 512-byte hdwr sectors (1004 MB) Jan 31 16:20:52 localhost kernel: [4300556.361000] sda: Write Protect is off Jan 31 16:20:52 localhost kernel: [4300556.361000] sda: Mode Sense: 45 00 00 08 Jan 31 16:20:52 localhost kernel: [4300556.361000] sda: assuming drive cache: write through Jan 31 16:20:52 localhost kernel: [4300556.361000] sda: sda1 Jan 31 16:20:52 localhost kernel: [4300556.374000] sd 0:0:0:0: Attached scsi removable disk sda Jan 31 16:20:52 localhost kernel: [4300556.416000] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jan 31 16:20:52 localhost kernel: [4300556.418000] sr 0:0:0:1: Attached scsi generic sg1 type 5 Jan 31 16:20:52 localhost kernel: [4300556.736000] sr0: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray Jan 31 16:20:52 localhost kernel: [4300556.738000] sr 0:0:0:1: Attached scsi CD-ROM sr0 Jan 31 16:20:56 localhost gconfd (samadams-5236): starting (version 2.14.0), pid 5236 user 'samadams' Jan 31 16:20:56 localhost gconfd (samadams-5236): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Jan 31 16:20:56 localhost gconfd (samadams-5236): Resolved address "xml:readwrite:/home/samadams/.gconf" to a writable configuration source at position 1 Jan 31 16:20:56 localhost gconfd (samadams-5236): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Jan 31 16:20:56 localhost gconfd (samadams-5236): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 3 Jan 31 16:20:56 localhost gconfd (samadams-5236): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 4 Jan 31 16:21:03 localhost gconfd (samadams-5236): Resolved address "xml:readwrite:/home/samadams/.gconf" to a writable configuration source at position 0 Jan 31 16:21:08 localhost kernel: [4300571.990000] UDF-fs: No VRS found Jan 31 16:21:08 localhost kernel: [4300572.101000] UDF-fs: No VRS found Jan 31 16:21:08 localhost kernel: [4300572.648000] ISO 9660 Extensions: Microsoft Joliet Level 3 Jan 31 16:21:09 localhost kernel: [4300572.662000] ISO 9660 Extensions: RRIP_1991A Jan 31 16:21:09 localhost kernel: [4300573.585000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Jan 31 16:22:21 localhost gconfd (root-5395): starting (version 2.14.0), pid 5395 user 'root' Jan 31 16:22:21 localhost gconfd (root-5395): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Jan 31 16:22:21 localhost gconfd (root-5395): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 1 Jan 31 16:22:21 localhost gconfd (root-5395): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Jan 31 16:22:21 localhost gconfd (root-5395): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 3 Jan 31 16:22:21 localhost gconfd (root-5395): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 4 Jan 31 16:22:33 localhost kernel: [4300657.787000] usbcore: deregistering driver speedtch Jan 31 16:22:50 localhost kernel: [4300674.588000] speedtch: Unknown parameter `dl_512_first1' Jan 31 16:24:00 localhost kernel: [4300744.135000] speedtch: Unknown parameter `dl-512-first1' Jan 31 16:24:32 localhost kernel: [4300776.313000] speedtch: Unknown parameter `dl-512-first-1' Jan 31 16:24:51 localhost gconfd (samadams-5236): Exiting Jan 31 16:24:51 localhost gconfd (samadams-5493): starting (version 2.14.0), pid 5493 user 'samadams' Jan 31 16:24:51 localhost gconfd (root-5395): GConf server is not in use, shutting down. Jan 31 16:24:51 localhost gconfd (root-5395): Exiting Jan 31 16:24:51 localhost gconfd (samadams-5493): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Jan 31 16:24:51 localhost gconfd (samadams-5493): Resolved address "xml:readwrite:/home/samadams/.gconf" to a writable configuration source at position 1 Jan 31 16:24:51 localhost gconfd (samadams-5493): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Jan 31 16:24:51 localhost gconfd (samadams-5493): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 3 Jan 31 16:24:51 localhost gconfd (samadams-5493): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 4 Jan 31 16:24:51 localhost gdm[4346]: Restarting computer... Jan 31 16:24:53 localhost shutdown[4346]: shutting down for system reboot Jan 31 16:24:54 localhost init: Switching to runlevel: 6 Jan 31 16:24:57 localhost kernel: [4300801.172000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) Jan 31 16:24:57 localhost kernel: [4300801.173000] apm: disabled on user request. Jan 31 16:25:04 localhost sdpd[4650]: terminating... Jan 31 16:25:04 localhost hcid[4645]: Exit. Jan 31 16:25:05 localhost kernel: Kernel logging (proc) stopped. Jan 31 16:25:05 localhost kernel: Kernel log daemon terminating. Jan 31 16:25:05 localhost exiting on signal 15 Jan 31 17:59:22 localhost syslogd 1.4.1#17ubuntu7: restart. Jan 31 17:59:22 localhost kernel: Inspecting /boot/System.map-2.6.15-23-386 Jan 31 17:59:23 localhost kernel: Loaded 23018 symbols from /boot/System.map-2.6.15-23-386. Jan 31 17:59:23 localhost kernel: Symbols match kernel version 2.6.15. Jan 31 17:59:23 localhost kernel: No module symbols loaded - kernel modules not enabled. Jan 31 17:59:23 localhost kernel: [4294667.296000] Linux version 2.6.15-23-386 ([EMAIL PROTECTED]) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Tue May 23 13:49:40 UTC 2006 Jan 31 17:59:23 localhost kernel: [4294667.296000] BIOS-provided physical RAM map: Jan 31 17:59:23 localhost kernel: [4294667.296000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) Jan 31 17:59:23 localhost kernel: [4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Jan 31 17:59:23 localhost kernel: [4294667.296000] BIOS-e820: 0000000000100000 - 000000000feac000 (usable) Jan 31 17:59:23 localhost kernel: [4294667.296000] BIOS-e820: 000000000feac000 - 0000000010000000 (reserved) Jan 31 17:59:23 localhost kernel: [4294667.296000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) Jan 31 17:59:23 localhost kernel: [4294667.296000] 0MB HIGHMEM available. Jan 31 17:59:23 localhost kernel: [4294667.296000] 254MB LOWMEM available. Jan 31 17:59:23 localhost kernel: [4294667.296000] On node 0 totalpages: 65196 Jan 31 17:59:23 localhost kernel: [4294667.296000] DMA zone: 4096 pages, LIFO batch:0 Jan 31 17:59:23 localhost kernel: [4294667.296000] DMA32 zone: 0 pages, LIFO batch:0 Jan 31 17:59:23 localhost kernel: [4294667.296000] Normal zone: 61100 pages, LIFO batch:15 Jan 31 17:59:23 localhost kernel: [4294667.296000] HighMem zone: 0 pages, LIFO batch:0 Jan 31 17:59:23 localhost kernel: [4294667.296000] DMI 2.3 present. Jan 31 17:59:23 localhost kernel: [4294667.296000] ACPI: RSDP (v000 DELL ) @ 0x000fd790 Jan 31 17:59:23 localhost kernel: [4294667.296000] ACPI: RSDT (v001 DELL GX110 0x00000007 ASL 0x00000061) @ 0x000fd7a4 Jan 31 17:59:23 localhost kernel: [4294667.296000] ACPI: FADT (v001 DELL GX110 0x00000007 ASL 0x00000061) @ 0x000fd7cc Jan 31 17:59:23 localhost kernel: [4294667.296000] ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000b) @ 0x00000000 Jan 31 17:59:23 localhost kernel: [4294667.296000] ACPI: PM-Timer IO Port: 0x808 Jan 31 17:59:23 localhost kernel: [4294667.296000] Allocating PCI resources starting at 20000000 (gap: 10000000:efb00000) Jan 31 17:59:23 localhost kernel: [4294667.296000] Built 1 zonelists Jan 31 17:59:23 localhost kernel: [4294667.296000] Kernel command line: root=/dev/hda1 ro quiet splash Jan 31 17:59:23 localhost kernel: [4294667.296000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic" Jan 31 17:59:23 localhost kernel: [4294667.296000] mapped APIC to ffffd000 (011ff000) Jan 31 17:59:23 localhost kernel: [4294667.296000] Initializing CPU#0 Jan 31 17:59:23 localhost kernel: [4294667.296000] PID hash table entries: 1024 (order: 10, 16384 bytes) Jan 31 17:59:23 localhost kernel: [4294667.296000] Detected 598.159 MHz processor. Jan 31 17:59:23 localhost kernel: [4294667.296000] Using pmtmr for high-res timesource Jan 31 17:59:23 localhost kernel: [4294667.296000] Console: colour VGA+ 80x25 Jan 31 17:59:23 localhost kernel: [4294667.539000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Jan 31 17:59:23 localhost kernel: [4294667.540000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Jan 31 17:59:23 localhost kernel: [4294667.574000] Memory: 247860k/260784k available (1976k kernel code, 12380k reserved, 606k data, 288k init, 0k highmem) Jan 31 17:59:23 localhost kernel: [4294667.574000] Checking if this processor honours the WP bit even in supervisor mode... Ok. Jan 31 17:59:23 localhost kernel: [4294667.634000] Calibrating delay using timer specific routine.. 1196.90 BogoMIPS (lpj=598452) Jan 31 17:59:23 localhost kernel: [4294667.634000] Security Framework v1.0.0 initialized Jan 31 17:59:23 localhost kernel: [4294667.634000] SELinux: Disabled at boot. Jan 31 17:59:23 localhost kernel: [4294667.634000] Mount-cache hash table entries: 512 Jan 31 17:59:23 localhost kernel: [4294667.634000] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 Jan 31 17:59:23 localhost kernel: [4294667.634000] CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 Jan 31 17:59:23 localhost kernel: [4294667.634000] CPU: L1 I cache: 16K, L1 D cache: 16K Jan 31 17:59:23 localhost kernel: [4294667.634000] CPU: L2 cache: 256K Jan 31 17:59:23 localhost kernel: [4294667.634000] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 Jan 31 17:59:23 localhost kernel: [4294667.634000] mtrr: v2.0 (20020519) Jan 31 17:59:23 localhost kernel: [4294667.634000] CPU: Intel Pentium III (Coppermine) stepping 03 Jan 31 17:59:23 localhost kernel: [4294667.634000] Enabling fast FPU save and restore... done. Jan 31 17:59:23 localhost kernel: [4294667.634000] Enabling unmasked SIMD FPU exception support... done. Jan 31 17:59:23 localhost kernel: [4294667.634000] Checking 'hlt' instruction... OK. Jan 31 17:59:23 localhost kernel: [4294667.638000] checking if image is initramfs... it is Jan 31 17:59:23 localhost kernel: [4294670.263000] Freeing initrd memory: 6837k freed Jan 31 17:59:23 localhost kernel: [4294670.308000] ACPI: Looking for DSDT ... not found! Jan 31 17:59:23 localhost kernel: [4294670.324000] ACPI: setting ELCR to 0200 (from 0e00) Jan 31 17:59:23 localhost kernel: [4294670.326000] NET: Registered protocol family 16 Jan 31 17:59:23 localhost kernel: [4294670.326000] EISA bus registered Jan 31 17:59:23 localhost kernel: [4294670.326000] ACPI: bus type pci registered Jan 31 17:59:23 localhost kernel: [4294670.339000] PCI: PCI BIOS revision 2.10 entry at 0xfc0ce, last bus=1 Jan 31 17:59:23 localhost kernel: [4294670.339000] PCI: Using configuration type 1 Jan 31 17:59:23 localhost kernel: [4294670.340000] ACPI: Subsystem revision 20051216 Jan 31 17:59:23 localhost kernel: [4294670.351000] ACPI: Interpreter enabled Jan 31 17:59:23 localhost kernel: [4294670.351000] ACPI: Using PIC for interrupt routing Jan 31 17:59:23 localhost kernel: [4294670.352000] ACPI: PCI Root Bridge [PCI0] (0000:00) Jan 31 17:59:23 localhost kernel: [4294670.352000] PCI: Probing PCI hardware (bus 00) Jan 31 17:59:23 localhost kernel: [4294670.352000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Jan 31 17:59:23 localhost kernel: [4294670.356000] Boot video device is 0000:00:01.0 Jan 31 17:59:23 localhost kernel: [4294670.356000] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO Jan 31 17:59:23 localhost kernel: [4294670.356000] PCI quirk: region 0880-08bf claimed by ICH4 GPIO Jan 31 17:59:23 localhost kernel: [4294670.357000] PCI: Transparent bridge - 0000:00:1e.0 Jan 31 17:59:23 localhost kernel: [4294670.357000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Jan 31 17:59:23 localhost kernel: [4294670.361000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] Jan 31 17:59:23 localhost kernel: [4294670.371000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 15) Jan 31 17:59:23 localhost kernel: [4294670.372000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) Jan 31 17:59:23 localhost kernel: [4294670.374000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. Jan 31 17:59:23 localhost kernel: [4294670.375000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15) Jan 31 17:59:23 localhost kernel: [4294670.375000] Linux Plug and Play Support v0.97 (c) Adam Belay Jan 31 17:59:23 localhost kernel: [4294670.375000] pnp: PnP ACPI init Jan 31 17:59:23 localhost kernel: [4294670.398000] pnp: PnP ACPI: found 13 devices Jan 31 17:59:23 localhost kernel: [4294670.398000] PnPBIOS: Disabled by ACPI PNP Jan 31 17:59:23 localhost kernel: [4294670.398000] PCI: Using ACPI for IRQ routing Jan 31 17:59:23 localhost kernel: [4294670.398000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Jan 31 17:59:23 localhost kernel: [4294670.408000] pnp: 00:0c: ioport range 0x800-0x85f could not be reserved Jan 31 17:59:23 localhost kernel: [4294670.408000] pnp: 00:0c: ioport range 0xc00-0xc7f has been reserved Jan 31 17:59:23 localhost kernel: [4294670.408000] pnp: 00:0c: ioport range 0x860-0x8ff could not be reserved Jan 31 17:59:23 localhost kernel: [4294670.408000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:01.0 Jan 31 17:59:23 localhost kernel: [4294670.408000] PCI: Bridge: 0000:00:1e.0 Jan 31 17:59:23 localhost kernel: [4294670.408000] IO window: e000-efff Jan 31 17:59:23 localhost kernel: [4294670.408000] MEM window: fd000000-feffffff Jan 31 17:59:23 localhost kernel: [4294670.408000] PREFETCH window: f9000000-faffffff Jan 31 17:59:23 localhost kernel: [4294670.408000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 Jan 31 17:59:23 localhost kernel: [4294670.410000] audit: initializing netlink socket (disabled) Jan 31 17:59:23 localhost kernel: [4294670.410000] audit(1170266323.409:1): initialized Jan 31 17:59:23 localhost kernel: [4294670.410000] VFS: Disk quotas dquot_6.5.1 Jan 31 17:59:23 localhost kernel: [4294670.410000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jan 31 17:59:23 localhost kernel: [4294670.410000] Initializing Cryptographic API Jan 31 17:59:23 localhost kernel: [4294670.410000] io scheduler noop registered Jan 31 17:59:23 localhost kernel: [4294670.410000] io scheduler anticipatory registered Jan 31 17:59:23 localhost kernel: [4294670.410000] io scheduler deadline registered Jan 31 17:59:23 localhost kernel: [4294670.410000] io scheduler cfq registered Jan 31 17:59:23 localhost kernel: [4294670.411000] isapnp: Scanning for PnP cards... Jan 31 17:59:23 localhost kernel: [4294670.768000] isapnp: No Plug & Play device found Jan 31 17:59:23 localhost kernel: [4294670.817000] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 Jan 31 17:59:23 localhost kernel: [4294670.821000] serio: i8042 AUX port at 0x60,0x64 irq 12 Jan 31 17:59:23 localhost kernel: [4294670.821000] serio: i8042 KBD port at 0x60,0x64 irq 1 Jan 31 17:59:23 localhost kernel: [4294670.821000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled Jan 31 17:59:23 localhost kernel: [4294670.821000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Jan 31 17:59:23 localhost kernel: [4294670.822000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Jan 31 17:59:23 localhost kernel: [4294670.829000] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Jan 31 17:59:23 localhost kernel: [4294670.829000] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Jan 31 17:59:23 localhost kernel: [4294670.831000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize Jan 31 17:59:23 localhost kernel: [4294670.831000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Jan 31 17:59:23 localhost kernel: [4294670.831000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Jan 31 17:59:23 localhost kernel: [4294670.831000] mice: PS/2 mouse device commo Jan 31 17:59:23 localhost kernel: [4294670.832000] EISA: Detected 0 cards. Jan 31 17:59:23 localhost kernel: [4294670.832000] NET: Registered protocol family 2 Jan 31 17:59:23 localhost kernel: [4294670.841000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) Jan 31 17:59:23 localhost kernel: [4294670.841000] TCP established hash table entries: 8192 (order: 3, 32768 bytes) Jan 31 17:59:23 localhost kernel: [4294670.841000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) Jan 31 17:59:23 localhost kernel: [4294670.841000] TCP: Hash tables configured (established 8192 bind 8192) Jan 31 17:59:23 localhost kernel: [4294670.841000] TCP reno registered Jan 31 17:59:23 localhost kernel: [4294670.842000] TCP bic registered Jan 31 17:59:23 localhost kernel: [4294670.842000] NET: Registered protocol family 1 Jan 31 17:59:23 localhost kernel: [4294670.842000] NET: Registered protocol family 8 Jan 31 17:59:23 localhost kernel: [4294670.842000] NET: Registered protocol family 20 Jan 31 17:59:23 localhost kernel: [4294670.842000] Using IPI Shortcut mode Jan 31 17:59:23 localhost kernel: [4294670.842000] ACPI wakeup devices: Jan 31 17:59:23 localhost kernel: [4294670.842000] PCI0 USB0 PCI1 KBD Jan 31 17:59:23 localhost kernel: [4294670.842000] ACPI: (supports S0 S1 S4 S5) Jan 31 17:59:23 localhost kernel: [4294670.842000] Freeing unused kernel memory: 288k freed Jan 31 17:59:23 localhost kernel: [4294670.873000] input: AT Translated Set 2 keyboard as /class/input/input0 Jan 31 17:59:23 localhost kernel: [4294671.012000] vga16fb: initializing Jan 31 17:59:23 localhost kernel: [4294671.012000] vga16fb: mapped to 0xc00a0000 Jan 31 17:59:23 localhost kernel: [4294671.125000] Console: switching to colour frame buffer device 80x25 Jan 31 17:59:23 localhost kernel: [4294671.125000] fb0: VGA16 VGA frame buffer device Jan 31 17:59:23 localhost kernel: [4294672.243000] Capability LSM initialized Jan 31 17:59:23 localhost kernel: [4294673.844000] ICH: IDE controller at PCI slot 0000:00:1f.1 Jan 31 17:59:23 localhost kernel: [4294673.844000] ICH: chipset revision 2 Jan 31 17:59:23 localhost kernel: [4294673.844000] ICH: not 100%% native mode: will probe irqs later Jan 31 17:59:23 localhost kernel: [4294673.844000] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA Jan 31 17:59:23 localhost kernel: [4294673.844000] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA Jan 31 17:59:23 localhost kernel: [4294673.844000] Probing IDE interface ide0... Jan 31 17:59:23 localhost kernel: [4294674.108000] hda: ST3120814A, ATA DISK drive Jan 31 17:59:23 localhost kernel: [4294674.363000] hdb: WDC WD204BA, ATA DISK drive Jan 31 17:59:23 localhost kernel: [4294674.415000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Jan 31 17:59:23 localhost kernel: [4294674.415000] Probing IDE interface ide1... Jan 31 17:59:23 localhost kernel: [4294674.781000] hdc: DVDROM 12X, ATAPI CD/DVD-ROM drive Jan 31 17:59:23 localhost kernel: [4294675.189000] hdd: SONY CD-RW CRX160E, ATAPI CD/DVD-ROM drive Jan 31 17:59:23 localhost kernel: [4294675.240000] ide1 at 0x170-0x177,0x376 on irq 15 Jan 31 17:59:23 localhost kernel: [4294675.262000] hda: max request size: 1024KiB Jan 31 17:59:23 localhost kernel: [4294675.297000] hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(66) Jan 31 17:59:23 localhost kernel: [4294675.321000] hda: cache flushes supported Jan 31 17:59:23 localhost kernel: [4294675.322000] hda: hda1 hda2 < hda5 > Jan 31 17:59:23 localhost kernel: [4294675.370000] hdb: max request size: 128KiB Jan 31 17:59:23 localhost kernel: [4294675.382000] hdb: 39876480 sectors (20416 MB) w/2048KiB Cache, CHS=39560/16/63, UDMA(66) Jan 31 17:59:23 localhost kernel: [4294675.382000] hdb: cache flushes not supported Jan 31 17:59:23 localhost kernel: [4294675.382000] hdb: hdb1 hdb2 < hdb5 > Jan 31 17:59:23 localhost kernel: [4294675.419000] hdc: ATAPI DVD-ROM drive, 512kB Cache, UDMA(33) Jan 31 17:59:23 localhost kernel: [4294675.419000] Uniform CD-ROM driver Revision: 3.20 Jan 31 17:59:23 localhost kernel: [4294675.423000] hdd: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache, UDMA(33) Jan 31 17:59:23 localhost kernel: [4294676.005000] usbcore: registered new driver usbfs Jan 31 17:59:23 localhost kernel: [4294676.006000] usbcore: registered new driver hub Jan 31 17:59:23 localhost kernel: [4294676.014000] USB Universal Host Controller Interface driver v2.3 Jan 31 17:59:23 localhost kernel: [4294676.015000] **** SET: Misaligned resource pointer: cfa89f02 Type 07 Len 0 Jan 31 17:59:23 localhost kernel: [4294676.016000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 Jan 31 17:59:23 localhost kernel: [4294676.016000] PCI: setting IRQ 11 as level-triggered Jan 31 17:59:23 localhost kernel: [4294676.016000] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 Jan 31 17:59:23 localhost kernel: [4294676.016000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 Jan 31 17:59:23 localhost kernel: [4294676.016000] uhci_hcd 0000:00:1f.2: UHCI Host Controller Jan 31 17:59:23 localhost kernel: [4294676.017000] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 Jan 31 17:59:23 localhost kernel: [4294676.017000] uhci_hcd 0000:00:1f.2: irq 11, io base 0x0000ff80 Jan 31 17:59:23 localhost kernel: [4294676.018000] hub 1-0:1.0: USB hub found Jan 31 17:59:23 localhost kernel: [4294676.018000] hub 1-0:1.0: 2 ports detected Jan 31 17:59:23 localhost kernel: [4294676.304000] Attempting manual resume Jan 31 17:59:23 localhost kernel: [4294676.325000] usb 1-1: new full speed USB device using uhci_hcd and address 2 Jan 31 17:59:23 localhost kernel: [4294676.379000] EXT3-fs: mounted filesystem with ordered data mode. Jan 31 17:59:23 localhost kernel: [4294676.414000] kjournald starting. Commit interval 5 seconds Jan 31 17:59:23 localhost kernel: [4294676.451000] hub 1-1:1.0: USB hub found Jan 31 17:59:23 localhost kernel: [4294676.453000] hub 1-1:1.0: 4 ports detected Jan 31 17:59:23 localhost kernel: [4294676.766000] usb 1-2: new full speed USB device using uhci_hcd and address 3 Jan 31 17:59:23 localhost kernel: [4294677.077000] usb 1-1.2: new full speed USB device using uhci_hcd and address 4 Jan 31 17:59:23 localhost kernel: [4294677.350000] usb 1-1.4: new full speed USB device using uhci_hcd and address 5 Jan 31 17:59:23 localhost kernel: [4294691.337000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Jan 31 17:59:23 localhost kernel: [4294691.343000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Jan 31 17:59:23 localhost kernel: [4294691.424000] i810_smbus 0000:00:01.0: i810/i815 i2c device found. Jan 31 17:59:23 localhost kernel: [4294691.893000] hw_random hardware driver 1.0.0 loaded Jan 31 17:59:23 localhost kernel: [4294691.907000] Floppy drive(s): fd0 is 1.44M Jan 31 17:59:23 localhost kernel: [4294691.919000] FDC 0 is a National Semiconductor PC87306 Jan 31 17:59:23 localhost kernel: [4294692.294000] Linux agpgart interface v0.101 (c) Dave Jones Jan 31 17:59:23 localhost kernel: [4294692.300000] agpgart: Detected an Intel i810 E Chipset. Jan 31 17:59:23 localhost kernel: [4294692.306000] agpgart: detected 4MB dedicated video ram. Jan 31 17:59:23 localhost kernel: [4294692.313000] agpgart: AGP aperture is 64M @ 0xf4000000 Jan 31 17:59:23 localhost kernel: [4294693.047000] parport: PnPBIOS parport detected. Jan 31 17:59:23 localhost kernel: [4294693.047000] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP] Jan 31 17:59:23 localhost kernel: [4294693.064000] input: PC Speaker as /class/input/input1 Jan 31 17:59:23 localhost kernel: [4294693.458000] input: PS2++ Logitech Wheel Mouse as /class/input/input2 Jan 31 17:59:23 localhost kernel: [4294693.581000] Real Time Clock Driver v1.12 Jan 31 17:59:23 localhost kernel: [4294693.595000] **** SET: Misaligned resource pointer: cb0b36a2 Type 07 Len 0 Jan 31 17:59:23 localhost kernel: [4294693.597000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 Jan 31 17:59:23 localhost kernel: [4294693.597000] PCI: setting IRQ 10 as level-triggered Jan 31 17:59:23 localhost kernel: [4294693.597000] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 Jan 31 17:59:23 localhost kernel: [4294693.597000] 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html Jan 31 17:59:23 localhost kernel: [4294693.597000] 0000:01:08.0: 3Com PCI 3c905 Boomerang 100baseTx at 0001ecc0. Vers LK1.1.19 Jan 31 17:59:23 localhost kernel: [4294694.195000] SCSI subsystem initialized Jan 31 17:59:23 localhost kernel: [4294694.213000] Initializing USB Mass Storage driver... Jan 31 17:59:23 localhost kernel: [4294694.537000] ts: Compaq touchscreen protocol output Jan 31 17:59:23 localhost kernel: [4294694.622000] usb 1-2: reset full speed USB device using uhci_hcd and address 3 Jan 31 17:59:23 localhost kernel: [4294694.751000] usbcore: registered new driver speedtch Jan 31 17:59:23 localhost kernel: [4294694.757000] scsi0 : SCSI emulation for USB Mass Storage devices Jan 31 17:59:23 localhost kernel: [4294694.758000] usb-storage: device found at 4 Jan 31 17:59:23 localhost kernel: [4294694.758000] usb-storage: waiting for device to settle before scanning Jan 31 17:59:23 localhost kernel: [4294694.758000] usbcore: registered new driver usb-storage Jan 31 17:59:23 localhost kernel: [4294694.758000] USB Mass Storage support registered. Jan 31 17:59:23 localhost kernel: [4294694.908000] speedtch 1-2:1.0: found stage 1 firmware speedtch-1.bin Jan 31 17:59:23 localhost kernel: [4294694.948000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 5 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1004 an 31 17:59:23 localhost kernel: [4294694.949000] usbcore: registered new driver usblp Jan 31 17:59:23 localhost kernel: [4294694.949000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Jan 31 17:59:23 localhost kernel: [4294695.233000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 Jan 31 17:59:23 localhost kernel: [4294695.233000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 Jan 31 17:59:23 localhost kernel: [4294695.338000] speedtch 1-2:1.0: found stage 2 firmware speedtch-2.bin Jan 31 17:59:23 localhost kernel: [4294695.544000] intel8x0_measure_ac97_clock: measured 50626 usecs Jan 31 17:59:23 localhost kernel: [4294695.544000] intel8x0: clocking to 48000 Jan 31 17:59:23 localhost kernel: [4294696.182000] lp0: using parport0 (interrupt-driven). Jan 31 17:59:23 localhost kernel: [4294696.355000] Adding 746980k swap on /dev/hda5. Priority:-1 extents:1 across:746980k Jan 31 17:59:23 localhost kernel: [4294696.512000] EXT3 FS on hda1, internal journal Jan 31 17:59:23 localhost kernel: [4294696.904000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 Jan 31 17:59:23 localhost kernel: [4294696.904000] md: bitmap version 4.39 Jan 31 17:59:23 localhost kernel: [4294697.740000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [EMAIL PROTECTED] Jan 31 17:59:23 localhost kernel: [4294698.092000] cdrom: open failed. Jan 31 17:59:23 localhost kernel: [4294698.527000] cdrom: open failed. Jan 31 17:59:23 localhost kernel: [4294698.532000] cdrom: open failed. Jan 31 17:59:23 localhost kernel: [4294699.107000] NTFS driver 2.1.25 [Flags: R/O MODULE]. Jan 31 17:59:23 localhost kernel: [4294699.169000] NTFS volume version 3.1. Jan 31 17:59:23 localhost kernel: [4294699.762000] Vendor: Kingston Model: DataTraveler U3 Rev: 6.50 Jan 31 17:59:23 localhost kernel: [4294699.762000] Type: Direct-Access ANSI SCSI revision: 00 Jan 31 17:59:23 localhost kernel: [4294699.766000] Vendor: Kingston Model: DataTraveler U3 Rev: 6.50 Jan 31 17:59:23 localhost kernel: [4294699.766000] Type: CD-ROM ANSI SCSI revision: 00 Jan 31 17:59:23 localhost kernel: [4294699.772000] usb-storage: device scan complete Jan 31 17:59:23 localhost kernel: [4294699.988000] Driver 'sd' needs updating - please use bus_type methods Jan 31 17:59:23 localhost kernel: [4294700.003000] SCSI device sda: 1961695 512-byte hdwr sectors (1004 MB) Jan 31 17:59:23 localhost kernel: [4294700.006000] sda: Write Protect is off Jan 31 17:59:23 localhost kernel: [4294700.006000] sda: Mode Sense: 45 00 00 08 Jan 31 17:59:23 localhost kernel: [4294700.006000] sda: assuming drive cache: write through Jan 31 17:59:23 localhost kernel: [4294700.016000] SCSI device sda: 1961695 512-byte hdwr sectors (1004 MB) Jan 31 17:59:23 localhost kernel: [4294700.019000] sda: Write Protect is off Jan 31 17:59:23 localhost kernel: [4294700.019000] sda: Mode Sense: 45 00 00 08 Jan 31 17:59:23 localhost kernel: [4294700.019000] sda: assuming drive cache: write through Jan 31 17:59:23 localhost kernel: [4294700.019000] sda: sda1 Jan 31 17:59:23 localhost kernel: [4294700.031000] sd 0:0:0:0: Attached scsi removable disk sda Jan 31 17:59:23 localhost kernel: [4294700.075000] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jan 31 17:59:23 localhost kernel: [4294700.076000] sr 0:0:0:1: Attached scsi generic sg1 type 5 Jan 31 17:59:23 localhost kernel: [4294700.098000] sr0: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray Jan 31 17:59:23 localhost kernel: [4294700.099000] sr 0:0:0:1: Attached scsi CD-ROM sr0 Jan 31 17:59:23 localhost kernel: [4294701.755000] NET: Registered protocol family 17 Jan 31 17:59:23 localhost kernel: [4294706.541000] CSLIP: code copyright 1989 Regents of the University of California Jan 31 17:59:23 localhost kernel: [4294706.552000] PPP generic driver version 2.4.2 Jan 31 17:59:23 localhost kernel: [4294706.630000] NET: Registered protocol family 10 Jan 31 17:59:23 localhost kernel: [4294706.631000] lo: Disabled Privacy Extensions Jan 31 17:59:23 localhost kernel: [4294706.631000] IPv6 over IPv4 tunneling driver Jan 31 17:59:23 localhost kernel: [4294708.265000] ACPI: Power Button (FF) [PWRF] Jan 31 17:59:23 localhost kernel: [4294708.582000] ibm_acpi: ec object not found Jan 31 17:59:23 localhost kernel: [4294708.648000] pcc_acpi: loading... Jan 31 17:59:27 localhost hpiod: 0.9.7 accepting connections at 1471... Jan 31 17:59:29 localhost kernel: [4294716.999000] ppdev: user-space parallel port driver Jan 31 17:59:29 localhost kernel: [4294717.415000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) Jan 31 17:59:29 localhost kernel: [4294717.416000] apm: overridden by ACPI. Jan 31 17:59:39 localhost hcid[4706]: Bluetooth HCI daemon Jan 31 17:59:39 localhost kernel: [4294726.687000] Bluetooth: Core ver 2.8 Jan 31 17:59:39 localhost kernel: [4294726.687000] NET: Registered protocol family 31 Jan 31 17:59:39 localhost kernel: [4294726.687000] Bluetooth: HCI device and connection manager initialized Jan 31 17:59:39 localhost kernel: [4294726.687000] Bluetooth: HCI socket layer initialized Jan 31 17:59:39 localhost hcid[4706]: Can't get system message bus name: Connection ":1.1" is not allowed to own the service "org.bluez" due to security policies in the configuration file Jan 31 17:59:39 localhost kernel: [4294726.766000] Bluetooth: L2CAP ver 2.8 Jan 31 17:59:39 localhost kernel: [4294726.766000] Bluetooth: L2CAP socket layer initialized Jan 31 17:59:39 localhost kernel: [4294726.810000] Bluetooth: RFCOMM socket layer initialized Jan 31 17:59:39 localhost kernel: [4294726.810000] Bluetooth: RFCOMM TTY layer initialized Jan 31 17:59:39 localhost kernel: [4294726.810000] Bluetooth: RFCOMM ver 1.7 Jan 31 17:59:39 localhost sdpd[4711]: Bluetooth SDP daemon Jan 31 17:59:39 localhost anacron[4755]: Anacron 2.3 started on 2007-01-31 Jan 31 17:59:39 localhost anacron[4755]: Normal exit (0 jobs run) Jan 31 17:59:39 localhost /usr/sbin/cron[4780]: (CRON) INFO (pidfile fd = 3) Jan 31 17:59:39 localhost /usr/sbin/cron[4781]: (CRON) STARTUP (fork ok) Jan 31 17:59:39 localhost /usr/sbin/cron[4781]: (CRON) INFO (Running @reboot jobs) Jan 31 18:00:20 localhost chat[3800]: alarm Jan 31 18:00:20 localhost chat[3800]: send (AT^M) Jan 31 18:00:20 localhost chat[3800]: expect (OK) Jan 31 18:00:40 localhost gconfd (samadams-5085): starting (version 2.14.0), pid 5085 user 'samadams' Jan 31 18:00:40 localhost gconfd (samadams-5085): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Jan 31 18:00:40 localhost gconfd (samadams-5085): Resolved address "xml:readwrite:/home/samadams/.gconf" to a writable configuration source at position 1 Jan 31 18:00:40 localhost gconfd (samadams-5085): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Jan 31 18:00:40 localhost gconfd (samadams-5085): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 3 Jan 31 18:00:40 localhost gconfd (samadams-5085): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 4 Jan 31 18:00:45 localhost gconfd (samadams-5085): Resolved address "xml:readwrite:/home/samadams/.gconf" to a writable configuration source at position 0 Jan 31 18:00:50 localhost kernel: [4294798.063000] UDF-fs: No VRS found Jan 31 18:00:50 localhost kernel: [4294798.375000] UDF-fs: No VRS found Jan 31 18:00:51 localhost kernel: [4294798.605000] ISO 9660 Extensions: Microsoft Joliet Level 3 Jan 31 18:00:51 localhost kernel: [4294798.619000] ISO 9660 Extensions: RRIP_1991A Jan 31 18:00:56 localhost kernel: [4294803.624000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Jan 31 18:01:20 localhost chat[3800]: alarm Jan 31 18:01:20 localhost chat[3800]: Failed Jan 31 18:01:20 localhost pppd[3678]: Connect script failed Jan 31 18:01:26 localhost gconfd (root-5229): starting (version 2.14.0), pid 5229 user 'root' Jan 31 18:01:26 localhost gconfd (root-5229): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Jan 31 18:01:26 localhost gconfd (root-5229): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 1 Jan 31 18:01:26 localhost gconfd (root-5229): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Jan 31 18:01:26 localhost gconfd (root-5229): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 3 Jan 31 18:01:26 localhost gconfd (root-5229): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 4 Jan 31 18:01:36 localhost kernel: [4294844.114000] usbcore: deregistering driver speedtch Jan 31 18:01:53 localhost kernel: [4294860.802000] usb 1-2: reset full speed USB device using uhci_hcd and address 3 Jan 31 18:01:53 localhost kernel: [4294860.928000] usbcore: registered new driver speedtch Jan 31 18:01:53 localhost firmware_helper[5268]: main: error loading '/lib/firmware/speedtch-1.bin.0.00' for device '/class/firmware/1-2:1.0' with driver 'speedtch' an 31 18:01:53 localhost firmware_helper[5271]: main: error loading '/lib/firmware/speedtch-1.bin.0' for device '/class/firmware/1-2:1.0' with driver 'speedtch' Jan 31 18:01:53 localhost kernel: [4294860.991000] speedtch 1-2:1.0: found stage 1 firmware speedtch-1.bin Jan 31 18:01:53 localhost firmware_helper[5277]: main: error loading '/lib/firmware/speedtch-2.bin.0.00' for device '/class/firmware/1-2:1.0' with driver 'speedtch' Jan 31 18:01:53 localhost firmware_helper[5280]: main: error loading '/lib/firmware/speedtch-2.bin.0' for device '/class/firmware/1-2:1.0' with driver 'speedtch' Jan 31 18:01:53 localhost kernel: [4294861.340000] speedtch 1-2:1.0: found stage 2 firmware speedtch-2.bin Jan 31 18:01:57 localhost kernel: [4294864.869000] usb 1-2: USB disconnect, address 3 Jan 31 18:02:02 localhost kernel: [4294870.325000] usb 1-2: new full speed USB device using uhci_hcd and address 6 Jan 31 18:02:03 localhost kernel: [4294871.061000] usb 1-2: reset full speed USB device using uhci_hcd and address 6 Jan 31 18:02:03 localhost firmware_helper[5307]: main: error loading '/lib/firmware/speedtch-1.bin.0.00' for device '/class/firmware/1-2:1.0' with driver 'speedtch' Jan 31 18:02:03 localhost firmware_helper[5310]: main: error loading '/lib/firmware/speedtch-1.bin.0' for device '/class/firmware/1-2:1.0' with driver 'speedtch' Jan 31 18:02:03 localhost kernel: [4294871.489000] speedtch 1-2:1.0: found stage 1 firmware speedtch-1.bin Jan 31 18:02:04 localhost firmware_helper[5322]: main: error loading '/lib/firmware/speedtch-2.bin.0' for device '/class/firmware/1-2:1.0' with driver 'speedtch' Jan 31 18:02:04 localhost firmware_helper[5316]: main: error loading '/lib/firmware/speedtch-2.bin.0.00' for device '/class/firmware/1-2:1.0' with driver 'speedtch' Jan 31 18:02:04 localhost kernel: [4294872.209000] speedtch 1-2:1.0: found stage 2 firmware speedtch-2.bin Jan 31 18:02:08 localhost kernel: [4294876.254000] ATM dev 0: ADSL line is synchronising Jan 31 18:02:21 localhost kernel: [4294888.799000] ATM dev 0: DSL line goes up Jan 31 18:02:21 localhost kernel: [4294888.806000] ATM dev 0: ADSL line is up (3552 kb/s down | 384 kb/s up) Jan 31 18:03:26 localhost gconfd (root-5229): GConf server is not in use, shutting down. Jan 31 18:03:26 localhost gconfd (root-5229): Exiting Jan 31 18:03:48 localhost gconfd (root-5388): starting (version 2.14.0), pid 5388 user 'root' Jan 31 18:03:48 localhost gconfd (root-5388): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Jan 31 18:03:48 localhost gconfd (root-5388): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 1 Jan 31 18:03:48 localhost gconfd (root-5388): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Jan 31 18:03:48 localhost gconfd (root-5388): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 3 Jan 31 18:03:48 localhost gconfd (root-5388): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 4 Jan 31 18:04:18 localhost gconfd (root-5388): GConf server is not in use, shutting down. Jan 31 18:04:18 localhost gconfd (root-5388): Exiting Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]