On Fri, 1 May 2009 03:47:39 +0400 Anton Vorontsov <avoront...@ru.mvista.com> wrote:
> Here are few patches that are needed to support spi-mmc slot on > MPC8610HPCD PowerPC boards: > > [1/9] spi_mpc83xx: Handles other Freescale processors > [2/9] spi_mpc83xx: Quieten down the "Requested speed is too low" message > [3/9] spi_mpc83xx: Add small delay after asserting chip-select line > [4/9] powerpc/86xx: Add MMC SPI support for MPC8610HPCD boards > Some or all of these seem appropriate to 2.6.30 and perhaps even -stable? ------------------------------------------------------------------------------ Register Now & Save for Velocity, the Web Performance & Operations Conference from O'Reilly Media. Velocity features a full day of expert-led, hands-on workshops and two days of sessions from industry leaders in dedicated Performance & Operations tracks. Use code vel09scf and Save an extra 15% before 5/3. http://p.sf.net/sfu/velocityconf _______________________________________________ spi-devel-general mailing list spi-devel-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/spi-devel-general
