Paul and all, Your message caused me to pause and think. It has been so long since I did that cable conversion that I had forgotten. So I took a look under the bonnet and discovered that I too had used the stock cable from a 1500 including the cable end just as you did. The stuff I fabricated is very similar to what the HS4 uses and therefore the application is the pretty much same as yours.
Cheers, Joe "[EMAIL PROTECTED]" wrote: > > I just dug back through my spreadsheet looking for > where/who/what I bought to use on my dual HS4 installation. > The only cable I could find I'd ever bought was a stock > 1500 style cable. I even used the stock 'C' cable attachment > piece from the ZS setup. It's visible in the second row > of photos (right side) at > http://www.teglerizer.com/triumphstuff/75w_carbswap.htm /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
