Here is the compressor I designed. www.firespitter.com/spitfire/compressor1.jpg www.firespitter.com/spitfire/compressor2.jpg
As I mentioned before, you need a welder. But other tools you'll need are some general clamps or way to brace the parts together (which you should have if you have a welder anyhow), a drill, 3/8" drill bit, and a hack saw, some metal cutting blades, and a file. (Goes much quicker if you have a reciprocating saw and an angle grinder instead of the hacksaw and file <-Just wasn't thinking at the time when I did it.) The assembly components are actually pretty cheap. The most expensive thing is the giant screw handle thing which I believe was $18-$19 (Made from a brand new giant "C" clamp from the hardware store that was cut and welded to the assembly). -Terry *** http://www.team.net/the-local *** Your messages not reaching the list? Check out http://www.team.net/posting.html *** unsubscribe/change address requests to [EMAIL PROTECTED] or try *** http://www.team.net/cgi-bin/majorcool *** http://www.team.net/mailman/listinfo *** Archives at http://www.team.net/archive *** Edit your replies!
