Correct. The body of the slave cylinder is indexed so the bolt holds it in
place even if the nut loosens. Remove the bolt and the cylinder should pull out.
Bill
Doug Braun <[EMAIL PROTECTED]> wrote: I think you have to completely remove the
bolt before
the cylinder will slide free.
Doug
> The clutch slave cylinder?
> Won't budge(even after loosening pinch bolt), so I
> drained the fluid and removed the hydraulic line.
> Darn, and I just re-bleeded it too this summer.
Your messages not reaching the list?
Check out http://www.team.net/posting.html
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
=== Help keep Team.Net on the air
=== http://www.team.net/donate.html
=== unsubscribe/change address requests to [EMAIL PROTECTED] or try
=== http://www.team.net/cgi-bin/majorcool
=== Other lists available at
=== http://www.team.net/mailman/listinfo
=== Archives at http://www.team.net/archive
=== http://www.team.net/the-local
=== Edit your replies!
