Adding shims increase the toe-out and removing then increase the toe-in. Joe ----- Original Message ----- From: "Bob Berger" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; <spitfires@autox.team.net> Sent: Wednesday, October 10, 2007 12:47 PM Subject: [Spits] [Spit] Rear Toe - Spitfire
> Hi all, > > I just had the alignment checked on my spitfire and the shop told me that > one of my rear wheels is toed in and the other is toed out. The wheel that > is toed out is is specs and the other one will be in spec by moving the > radius arm with 1 shim. > > The only problem is that they/I do not know enough about the spitfire rear > end geometry to tell me if I need to add the shim or remove the shim. > > Can anyone tell me which I need? > > Thanks > > Bob Berger > 78 Spitfire with new tires > _______________________________________________ > [EMAIL PROTECTED] > > Spitfires@autox.team.net > http://autox.team.net/mailman/listinfo/spitfires _______________________________________________ [EMAIL PROTECTED] Spitfires@autox.team.net http://autox.team.net/mailman/listinfo/spitfires