Hi Robert,
>>I do not know what is the difference between IPv6 Destination Address in
the fixed header and "final destination". Where do you carry "final
destination" address ?
See Section 4.4 in RFC 8200. Hope its clear what's the final destination
and the context in which it is used.
Segments Left 8-bit unsigned integer. Number of route
segments remaining, i.e., number of explicitly
listed intermediate nodes still to be visited
before reaching the final destination.
Regards
Reji
On Thu, Sep 19, 2019 at 10:26 PM Robert Raszuk <rob...@raszuk.net> wrote:
> IPv6 fixed header has only one destination address. So TE midpoint is
> either a packet's destination or not. It can not be both.
>
> I do not know what is the difference between IPv6 Destination Address in
> the fixed header and "final destination". Where do you carry "final
> destination" address ?
>
> Many thx,
> R.
>
> On Thu, Sep 19, 2019 at 6:17 PM Reji Thomas <rejithoma...@gmail.com>
> wrote:
>
>> Hi Robert,
>>
>>
>> >>Well the crux of the matter is that you still need to process all EHs at
>> >>each IPv6 destination which here means each transit node per RFC8200
>>
>>
>> From RFC 8200 that doesn't seem to be the case or at least as I understand.
>> See Section 4.1 note 1 and note 3. Am I missing something?
>>
>>
>>
>> IPv6 header
>> Hop-by-Hop Options header
>> Destination Options header (note 1)
>> Routing header
>> Fragment header
>> Authentication header (note 2)
>> Encapsulating Security Payload header (note 2)
>> Destination Options header (note 3)
>> Upper-Layer header
>>
>> note 1: for options to be processed by the first destination that
>> appears in the IPv6 Destination Address field plus
>> subsequent destinations listed in the Routing header.
>>
>> note 2: additional recommendations regarding the relative order of
>> the Authentication and Encapsulating Security Payload
>> headers are given in [RFC4303
>> <https://tools.ietf.org/html/rfc4303>].
>>
>> note 3: for options to be processed only by the final destination
>> of the packet.
>>
>>
>> Regards
>> Reji
>>
>> On Thu, Sep 19, 2019 at 9:00 PM Robert Raszuk <rras...@gmail.com> wrote:
>>
>>>
>>> I disagree. PPSI and PSSI leverages the DOHs in IPv6 architecture
>>>> better. The SRv6+ drafts explain the usecases better FYI.
>>>>
>>>
>>> Well the crux of the matter is that you still need to process all EHs at
>>> each IPv6 destination which here means each transit node per RFC8200. That
>>> is regardless what any other spec says ... unfortunately.
>>>
>>> Best,
>>> R.
>>>
>>>
>>>
>>> --------------------------------------------------------------------
>>> IETF IPv6 working group mailing list
>>> i...@ietf.org
>>> Administrative Requests: https://www.ietf.org/mailman/listinfo/ipv6
>>> --------------------------------------------------------------------
>>>
>> _______________________________________________
>> spring mailing list
>> spring@ietf.org
>> https://www.ietf.org/mailman/listinfo/spring
>>
>
_______________________________________________
spring mailing list
spring@ietf.org
https://www.ietf.org/mailman/listinfo/spring
