Dear All,
I support the adoption of the CSID draft. CSID adds the NEXT and REPLACE flavors to the END behavior but remains thoroughly coherent with the SRv6 specification described in RFC8996. As such, I think that CSID is consistent with the single SRv6 dataplane objective. As evidence of this, interoperability experiments have been performed involving various dataplanes (P4, eBPF, VPP, linux network stack, etc.), which show that CSID can be implemented as a single dataplane solution. Moreover, I worked on the P4 implementation and adding the support for CSID to existing SRv6 implementation has been a straightforward task, without requiring new dataplane primitives, thanks to the CSID consistency to the SRv6 specification. Best regards, Angelo Tulumello Da: spring <spring-boun...@ietf.org> Per conto di James Guichard Inviato: venerdì 1 ottobre 2021 16:05 A: SPRING WG <spring@ietf.org> Cc: spring-cha...@ietf.org Oggetto: [spring] WG Adoption call for https://datatracker.ietf.org/doc/draft-filsfilscheng-spring-srv6-srh-compression/ Dear WG: The chairs would like to express their appreciation for all the responses received to our emails with reference to how the working group wishes to move forward with respect to a solution for SRv6 compression. The apparent inclination of the working group is to use https://datatracker.ietf.org/doc/draft-filsfilscheng-spring-srv6-srh-compression/ as the basis for its compression standardization work. That is part of what this email attempts to confirm. Because of the above the chairs would like to issue a 2-week WG call for adoption ending October 15th for https://datatracker.ietf.org/doc/draft-filsfilscheng-spring-srv6-srh-compression/ but with some clear guidelines as follows. By expressing support for adoption of this document you are fully aware of and are acknowledging that: 1. The SPRING working group is adopting a document that has multiple SRv6 Endpoint behaviors. 2. The document is a “living” document; it may change as it goes through review and analysis by the SPRING working group. 3. All open discussion points raised on our mailing list MUST be addressed BEFORE said document is allowed to progress from the working group to publication. A list of these discussion points will be documented in the WG document and maintained by the document editor in conjunction with the chairs. 4. If this document is adopted by the working group, the chairs specify as part of the adoption call that the following text describing an open issue be added to the document in the above-described open issues section: * "Given that the working group has said that it wants to standardize one data plane solution, and given that the document contains multiple SRv6 EndPoint behaviors that some WG members have stated are multiple data plane solutions, the working group will address whether this is valid and coherent with its one data plane solution objective.". Please consider the above guidelines as you decide on whether to support or not this WG adoption. Please express clearly your reasoning for support/non-support as well as any open discussion points you would like addressed should the document be adopted into the working group. Thanks! Jim, Bruno & Joel
_______________________________________________ spring mailing list spring@ietf.org https://www.ietf.org/mailman/listinfo/spring