-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Mike
Brown (TECH- GVL)
Sent: Tuesday, November 14, 2006 5:35 AM
To: [email protected]
Subject: RE: Plastic Tenting of CPVC

Putting plastic sheeting over CPVC  pipe installed in attics has been
the practice in the Southeast since the early days of residential fire
sprinklers.  The tent is installed over the pipe and then the insulation
for the attic is installed on top of the plastic.  This creates a
barrier to retain the heat from inside the heated space around the CPVC
pipe.

Michael L. Brown

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of herb
Sent: Monday, November 13, 2006 4:52 PM
To: [email protected]
Subject: Plastic Tenting of CPVC

I recently ran into a contractor who asked if we were going to 'tent'
our
attic CPVC pipe with sheets of black plastic.  He said our competitors
did
it and they told him it was really important.  No explanation why.  The
AHJ
said he didn't care if it was done or not.  I don't see any mention of
plastic being recommended in either the NFPA-13D or Blazemaster
installation
manual.  Does anyone have any experience with this or thoughts on what
appear to be 'made up' specifications.
Thanks
Herb Schairbaum
Blue Water Fire Sprinklers
Tacoma WA


_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

Reply via email to