That is the entire system with the exception of a separate office area that they have allowed us to exclude due to the separation and f=difference in occupancy. Greg
Living Water Fire Protection, LLC 1160 McKenzie Road Cantonment, FL 32533 850-937-1850 Fax: 850-937-1852 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Roland Huggins Sent: Thursday, November 30, 2006 9:18 AM To: [email protected] Subject: Re: Overhead and Mezzanine calcs the inclusion (or rather exclusion) of a mezzanine from a calculation of the ceiling is not my question. IF including the additional 540 sf below the mezzanine is causing a problem, it sounds like you are calc'ing just the 15X51. What happened to the 3000 sf remote area or does this new room qualify for the room design? Roland On Nov 30, 2006, at 6:36 AM, Greg McGahan wrote: > > Normally we error on the side of caution but we have a situation > with calcs > that are not working with more than a 2.4% cushion so I have to ask. > > Existing building with existing 3" water supply with new room and new > mezzanine. The new room is 51' by 15' with a lower mezzanine that > is 36' x > 15'. The remote area is specified at 3,000 sqft so there is no > reductions > etc. > > Question: Do I need to calculate the entire area with the mezz.? I > need > something concrete to submit if I do not have to include them. > > Thanks, > Greg McGahan > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
