Thom,
I think you mean "Imiron". This is a two-part epoxy coating that they
use over gelcoat on fiberglass boats as well as other similar
applications (One local firm paints railroad cars with the stuff).
It's a very specialized product and may have to be applied by a
specialized contractor. I'm not even sure it could be reliably done
on pipe and fittings in place. It's also nasty health-wise and the
solvents are very flammable. Methinks there must be better arrangements.
Todd
At 11:08 AM 2/28/2007, you wrote:
Off site applied epoxy like "Emeron" with the appropriate primer has
lasted fairly we'll, but the field applications never seem to hold up.
Thom McMahon
Firetech, Inc.
2560 Copper Ridge Dr
Steamboat Springs, CO 80488-2136
Tel: 970-879-7952
Fax: 970-879-7926
----- Original Message ----- From: "Dan Arbel" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Wednesday, February 28, 2007 12:10 AM
Subject: Seaside corrosion effect
I would appreciate the members' opinion regarding the type of coating that
would provide the best corrosion protection for near seaside installation.
Dan
Dan Arbel Risk Eng
T: +972 (04) 8243337
F: +972 (04) 8243278
M: +972 (052) 2810593
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
Todd G. Williams, PE
Fire Protection Design/Consulting
Stonington, Connecticut
860-535-2080
www.fpdc.com
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
