Check out Muellerindustries.com
Specifically the High Ear fittings such as the A03071 1" high ear coupling.
Using either SS or Copper nails into wood. Also the high ear elbows work
good.
Thom McMahon
Firetech, Inc.
2560 Copper Ridge Dr
Steamboat Springs, CO 80488-2136
Tel: 970-879-7952
Fax: 970-879-7926
----- Original Message -----
From: "Gobeli, Paul" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Wednesday, June 13, 2007 8:41 AM
Subject: Non-ferrous hanger material for MRI room
A coworker needs to find non-ferrous hangers for an MRI room. We are
using copper pipe. I have talked to many fab shops and they can't find
any 100% copper or brass hangers. They can only find copper coated. Do
you have any suggestions on what I can use to anchor the hangers into
the wood construction, a non-ferrous all thread rod, and also for a
hanger to hold the pipe? I also think the material needs to be UL and FM
approved
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)
