Several jurisdictions around here require a placard to be placed on the 
building indicating the location of the FDC or if it's at the street at the 
backflow.   It's kind of funny sometimes to see this FDC sticking out of the 
ground 10 ft off the road with a big ole red and white sign saying FDC on it.  
Seems like one of those DUH occasions. 


Craig L. Prahl, CET
Fire Protection Group
Mechanical Department
CH2MHILL
Lockwood Greene
1500 International Drive
PO Box 491, Spartanburg, SC  29304-0491
Direct - 864.599.4102
Fax - 864.599.8439
[EMAIL PROTECTED]
http://www.lg.com


-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of å... ....
Sent: Thursday, August 30, 2007 4:53 PM
To: [email protected]
Subject: 6 degrees of separation-- making the FDC

finished a sprinkler system design.
it was close to the 10% buffer, so
the AHJ said, "what if the fire department draws down too much water from the 
hydrants and we don´t have enough pressure?"

I say, "does that mean you want a
fire pump?"

He says, "yes, I would prefer one."

I say, "i was not a good firefighter, but I do remember our engineers were 
pretty keen on making the connections, are you saying that the first due engine 
doesn't make the connections?"

He says, "yes, that happens about 20%
of the time.  They arrive at a building, and don't know if there are 
connections there or not."

I think, "this IS a problem,"


"...but not mine."

should we put signs up
outside of all buildings with FDC's or is this something the engineer/driver 
should know, or something the officer in the bucket should tell him?




scot deal
excelsior fire
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)

Reply via email to