George, Fire guys need to be certified in Washington. I get to review and approve/disapprove the 24 stuff for civil PEs. The irony....
On 10/31/07, Thom McMahon <[EMAIL PROTECTED]> wrote: > If plumbers are registered or lic. in Pa maybe you could have the Rotorooter > guy sign off? > > Thom McMahon > Firetech, Inc. > 2560 Copper Ridge Dr > Steamboat Springs, CO 80488-2136 > Tel: 970-879-7952 > Fax: 970-879-7926 > ----- Original Message ----- > From: "George Church" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Wednesday, October 31, 2007 7:32 AM > Subject: RE: Re[2]: hanger specs > > > > Well, I've been deemed incompetent to sign off on a 20 head 13D system > > here > > in PA, need to run it past a Registered Design professional according to > > the > > 3rd party. He's right, per our PA UCC, just applied real world logic for a > > moment and was a little frustrated by the irony of it all. Maybe I'll send > > it to a Professional Land Surveyor for a letter stating "generally > > conforms > > to the building" which is all our UCC requires the RDP to say. > > > > Being a 13D, he could comment that we've used an unlisted pump, unlisted > > tank, in accordance with 13D. > > > > So maybe we'll hang our 1" CPVC as you describe, by the tie its all over. > > > > glc > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Charles > > Thurston > > Sent: Tuesday, October 30, 2007 12:44 PM > > To: George Church > > Subject: Re[2]: hanger specs > > > > Hello George, > > > > As I read this I got a mental image of 1" pipe hung with 1" rod on a > > clevis hanger. Ha Ha > > > > Tuesday, October 30, 2007, 12:18:13 PM, you wrote: > > > >> They're going to list bigger rod than you ever imagined, hanger spacing > > that > >> would put you out of business if you didn't include it, and if you give > > them > >> an order of magnitude on the added cost, you'll likely get an addendum > > that > >> allows NFPA #13 requirements be met and have a nice day. Did I mention > >> Clevis? > > > >> glc > > > >> -----Original Message----- > >> From: [EMAIL PROTECTED] > >> [mailto:[EMAIL PROTECTED] On Behalf Of G. Tim > > Stone > >> Sent: Tuesday, October 30, 2007 10:08 AM > >> To: [email protected] > >> Subject: RE: hanger specs > > > >> Greg, > > > >> > > > >> I googled and received this information back: > > > >> > > > >> MSS SP-58 Pipe Hangers and Supports - Materials, Design and Manufacture > > > >> > > > >> > > > >> G. Tim Stone > > > >> > > > >> > > > >> NICET Level III Engineering Technician > > > >> Fire Protection Sprinkler Design > > > >> and Consulting Services > > > >> > > > >> 117 Old Stage Rd. - Essex Jct., VT. 05452 > > > >> TEL: (802) 434-2968 Fax: (802) 434-4343 > > > >> [EMAIL PROTECTED] > > > >> > > > >> > > > >>> -----Original Message----- > > > >>> From: [EMAIL PROTECTED] [mailto:sprinklerforum- > > > >>> [EMAIL PROTECTED] On Behalf Of Greg McGahan > > > >>> Sent: Tuesday, October 30, 2007 9:59 AM > > > >>> To: [email protected] > > > >>> Subject: hanger specs > > > >>> > > > >>> We are looking at an airport job with these hanger specs and I am not > > > >>> familiar with MSS-SP-58. Does anyone know what these are? > > > >>> > > > >>> Thanks, > > > >>> > > > >>> Greg > > > >>> > > > >>> > > > >>> > > > >>> Living Water Fire Protection, LLC > > > >>> > > > >>> 1160 McKenzie Road > > > >>> > > > >>> Cantonment, FL 32533 > > > >>> > > > >>> 850-937-1850 > > > >>> > > > >>> Fax: 850-937-1852 > > > >>> > > > >>> > > > >>> > > > >>> _______________________________________________ > > > >>> Sprinklerforum mailing list > > > >>> [email protected] > > > >>> http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > > > >>> > > > >>> To Unsubscribe, send an email > >>> to:[EMAIL PROTECTED] > > > >>> (Put the word unsubscribe in the subject field) > > > >> _______________________________________________ > >> Sprinklerforum mailing list > >> [email protected] > >> http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > > > >> To Unsubscribe, send an email > >> to:[EMAIL PROTECTED] > >> (Put the word unsubscribe in the subject field) > > > >> _______________________________________________ > >> Sprinklerforum mailing list > >> [email protected] > >> http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > > > >> To Unsubscribe, send an email > >> to:[EMAIL PROTECTED] > >> (Put the word unsubscribe in the subject field) > > > > > > -- > > Best regards, > > Charles mailto:[EMAIL PROTECTED] > > > > _______________________________________________ > > Sprinklerforum mailing list > > [email protected] > > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > > > > To Unsubscribe, send an email to:[EMAIL PROTECTED] > > (Put the word unsubscribe in the subject field) > > > > _______________________________________________ > > Sprinklerforum mailing list > > [email protected] > > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > > > > To Unsubscribe, send an email to:[EMAIL PROTECTED] > > (Put the word unsubscribe in the subject field) > > > > > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > > To Unsubscribe, send an email to:[EMAIL PROTECTED] > (Put the word unsubscribe in the subject field) > -- Ron Greenman at home.... _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
