Good afternoon to all,
   
  If someone on the list with a hydraulic calc program could do me the favor of 
calculating the friction loss over the following run it would help 
tremendously.  I have a 1920's circa mill complex that has endured some 
deferred maintenance and now tenant storage / commodity problems.  The owners 
have come to the table and are now working with us (AHJ) to repair / resolve 
our concerns.  I'm just trying to estimate water delivery to the remote point 
so we can do some comparison with available flows on the property.  
   
  I have calculated out the elevation losses from the city supply pressure and 
would like to know what kind of pipe friction loss I can expect to the remote 
area.  The system is now dry (was wet in 1920 but converted to dry around 1980) 
- a whole different story - and is using standard weight threaded pipe and 
fittings (pipe schedule no doubt).  I have 70 psi at base of riser and after 
elevation loss Im down to 46 psi.  Now factor in the following pipe run:
   
  45 feet of 6 inch + 35 feet of 4 inch + 15 feet of 2 1/2" + 10 feet of 1 1/2" 
+ 10 feet of 1" to end of branch line.
   
  I dont have any programs to help me with that and would appreciate it someone 
could run that through for me so I can have the end head pressure.  Thanks very 
much.
   
  Dave P.
  An AHJ in NJ
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)

Reply via email to