We need some AutoCad 2000 detail help. Sprinkler plans are being
assembled for the new plan review class for the National Fire Academy.
The bulk of the design is completed but we are missing some details.
Others have submitted details and they were awesome and saved a lot of
time. If you have any of the following, it would be appreciated.
15,000 Gallon Water Tank Details
I believe the tank will be located outside but an underground could be
an option as well. Plan views and elevation views.
Tank fill valve details.
Tank Foundation
Fire Department Connection Detail
The FDC will be located at the street or wall and run into the
building's basement.
Fire Pump Room Plan view
The room size is 6 X 12. Plus I will fit in 3 risers (wet system, dry
system, and standpipe).
I could also use some hydraulic calculation help. The calcs are taken
to the standpipe.
Size the fire pump
Calcs for the standpipes
5th Floor - 4 head residential calc
4th Floor - LH Standard Spray (9 heads)
3rd Floor - LH Standard Spray 6 head (QR Reduction) They also want a
preaction system to be included. This would be a good floor.
2nd Floor - Extended Coverage and looped cross main.
1st Floor - 4 Remote Areas - OH GR1 Kitchen, LH Restaurant, and OH GR2
Retail (ECOH heads), and draft stop water curtain. I currently have
the cross main looped, but I got an indication from an instructor not
to loop the cross main so hand calculations can be completed.
Basement - Parking Garage - Dry pipe system
Plan Review - I think it would also be a good idea for someone to
review the plans and find the mistakes I am not aware of yet. I
worked on the plans under delirium. Ha!
Thank you,
Tom Wellen
AFSA Technical Services
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)
