No reason given...probably the same reason he had another item on there for
us; to add rod stiffeners due to the rod is too long and unrestrained.

Bobby Gillett
Project Manager
[EMAIL PROTECTED]
(731)-424-0130
     
 
 
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Friday, June 20, 2008 10:45 AM
To: [email protected]
Subject: RE: Wall Brackets

Is he going to verify that the wall system is capable of supporting the
water filled pipe?

I would tell him that that he needs to provide a sealed drawing showing the
details on size of wall bracket, mounting and fastening details, etc.  since
this will be a non-typical support.  Then see what he says.

He may say that's the contractor's responsibility but it's not the
contractor's responsibility to do a structural/architectural analysis of the
wall to determine if it will hold it up.

What's his reasoning for the change?


Craig L. Prahl, CET   
Fire Protection Group
Mechanical Department
CH2MHILL
Lockwood Greene
1500 International Drive
PO Box 491, Spartanburg, SC  29304-0491
Direct - 864.599.4102
Fax - 864.599.8439
[EMAIL PROTECTED]
http://www.ch2m.com 

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Bobby Gillett
Sent: Friday, June 20, 2008 11:18 AM
To: [email protected]
Subject: Wall Brackets

I have a punch list from the engineer of a project we are finishing up. One
of the items on there is to remove the hangers attached to the structure and
provide wall mounted brackets. The pipe is 1ΒΌ" sch 40 and the wall is
typical gypsum board and light gauge metal studs. I'm about to call and
question him on this for the simple fact the pipe is currently hung
properly. Looking for some more ammo - what say ye?

 

Bobby Gillett

Project Manager

[EMAIL PROTECTED]

(731)-424-0130

   

 

 

 

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)

Reply via email to