Remember, it is not just the cost of material, but the installation cost as well. If they have to make up 6" threaded in the field, you are not only going to not make friends, but add a significant amount of labor time. Is the 6" galv required to be sch 40? How are you going to connect the full pieces of pipe?
At 09:29 AM 5/12/2009, you wrote: >I have a 6" galvanized main and have to come off with 40 2" branch lines. >I'm trying to determine the least costly way to transition to the 2" branch >lines. The two options I have are using 6"x2" threaded reducer tee or 2" >thread-o-let and re-galvanizing the weld. The client requires galvanized >pipe and does not want to use mechanical clamp fittings. Any suggestions to >which method is the least expensive? > > > >Thanks > >Adam Davis > > >NOTICE - This communication may contain confidential and privileged >information that is for the sole use of the intended recipient. Any >viewing, copying or distribution of, or reliance on this message by >unintended recipients is strictly prohibited. If you have received >this message in error, please notify us immediately by replying to >the message and deleting it from your computer. >_______________________________________________ >Sprinklerforum mailing list >http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum >For Technical Assistance, send an email to: [email protected] > >To Unsubscribe, send an email to:[email protected] >(Put the word unsubscribe in the subject field) Todd G. Williams, PE Fire Protection Design/Consulting Stonington, Connecticut www.fpdc.com 860.535.2080 _______________________________________________ Sprinklerforum mailing list http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
