Brown. He was doing a promo tour for Brown Bear Brown Ale, which is brewed in Chicago.
At 06:24 PM 5/15/2009, you wrote: >Russell, > >I'm a bit confused by your reply. Rich doesn't mention the distance of >the riser from a wall, the location of heads relative to the riser, >nor whether any pipe is exposed or not, only that the FDC run is dry. >Where did your concerns come from? I only bring this up because I've >noticed issues becoming muddled on the Forum when information not >presented in the question is added from out of thin air. This is like >the obverse of the unnecessary information that clutters up those >infamous word questions in math (like the color and make of the car >leaving Chicago at 2 PM in a westerly direction at 45 mph with a low >tire--What color is the bear?) Not that you're the only one that does >this but this time I wanted to comment. And by the way: A bear travels >due south for sixteen miles. Turns left and travels due east for four >miles. Turns left again and travels another sixteen miles due north. >After several hours he arrives at the place he departed from. What >color is the bear? > >On Fri, May 15, 2009 at 3:08 PM, Russell Rewis ><[email protected]> wrote: > > Rich, the pipe being dry is not the first issue you need to > consider. A CPVC riser (and associated pipes) has to be within 2" > of the wall and a sprinkler has to be installed no farther than 12" > from the riser. CPVC can only be ran exposed by adhering to strick > guidelines contained in the design guide of the manufacturer. Your > exposed run of pipe doesn't meet those requirements. You really > need to involve the manufacturer or distributor. > > > > Russell > > > > > > > > > >>We are reviewing a proposal for a wet pipe sprinkler system using > CPVC pipe. However, there is a run of CPVC pipe between the FDC > and the riser that is dry, is this standard practice or acceptable? > > > > > > > > > > > > ________________________________________________________________ > > Sent via the WebMail system at brownautomatic.com > > > > > > > > > > _______________________________________________ > > Sprinklerforum mailing list > > http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum > > For Technical Assistance, send an email to: [email protected] > > > > To Unsubscribe, send an email to:[email protected] > > (Put the word unsubscribe in the subject field) > > > > > >-- >Ron Greenman >at home.... >_______________________________________________ >Sprinklerforum mailing list >http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum >For Technical Assistance, send an email to: [email protected] > >To Unsubscribe, send an email to:[email protected] >(Put the word unsubscribe in the subject field) Todd G. Williams, PE Fire Protection Design/Consulting Stonington, Connecticut www.fpdc.com 860.535.2080 _______________________________________________ Sprinklerforum mailing list http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
