Tom: Check NFPA 99 4-3.1.1.9 medical air comp supply systems, and table 4-3.1.2.4 and table 4-3.1.2.7 as well as the medical facility people JACHO and AIA, look at NFPA 99C Level three comp gas system, and don't forget oil free, and filter and receiver requirements.
PS your liability insurance may not cover this type of work. Thom McMahon, SET Firetech, Inc. 2560 Copper Ridge Dr P.O. Box 882136 Steamboat Springs, CO 80488 Tel: 970-879-7952 Fax: 970-879-7926 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Tom Duross Sent: Tuesday, May 19, 2009 6:31 PM To: [email protected] Subject: Compressed Air Piping I'm looking to specify a central plant air system for a testing client to put on the street. I've come up with a size but to save pipe size, I'd like to run 80-100 PSI air through their facility. Should I specify seamless and malleable/di or copper brazed? PR at use points, 22 locations, 25 floors. The building is new. Biomedical use if that applies. Thanks. _______________________________________________ Sprinklerforum mailing list http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
