If you don't already own a set, purchase a set of "Packing pullers"
T-handled cork screw's for threading into old packing to assist in pulling.
Much neater than using old screw drivers.

Thom McMahon, SET
Firetech, Inc.
2560 Copper Ridge Dr
P.O. Box 882136
Steamboat Springs, CO 80488
Tel:  970-879-7952
Fax: 970-879-7926



-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Timothy W
Goins
Sent: Thursday, July 09, 2009 9:37 PM
To: [email protected]
Subject: RE: Traverse city os&y valves

Pull ONE(1) out, wear gloves, face mask, etc.. (If you're afraid). Measure
it and purchase replacement stock from a pump supplier or parts store.

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Jay Jay
Blocker
Sent: Thursday, July 09, 2009 9:41 PM
To: [email protected]
Subject: Re: Traverse city os&y valves


Recently we discovered several valves from Traverse City.  We could not
locate parts from any of our sources so we checked with the water distict.
They told us to be careful of the packings from those valves because of
Asbestos.  The verdict was that as far as they knew all of those valves had
it.




________________________________
From: Forest Wilson <[email protected]>
To: Forum <[email protected]>
Sent: Thursday, July 9, 2009 2:55:35 PM
Subject: Traverse city os&y valves

A property has 5 8" os&y valves with leaking packings, all about 30 years
old. 
Made by Traverse City Iron Works. 
Did all valves from that era contain asbestos in the packing material? Does
anyone know what size packing to use to re-pack? Forest Wilson             
    Project Manager              Cherokee Fire Protection Co. 1855 Bellbrook
Ave. Ste C  Xenia OH 45385              888-347-3079 ph           
614-455-4324 fx          
_______________________________________________
Sprinklerforum mailing list
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)



      
_______________________________________________
Sprinklerforum mailing list
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)


_______________________________________________
Sprinklerforum mailing list
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

_______________________________________________
Sprinklerforum mailing list
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

Reply via email to