Vince, >From IBC 2006
910.1 General. Where required by this code or otherwise installed, smoke and heat vents or mechanical smoke exhaust systems and draft curtains shall conform to the requirements of this section. Exceptions: 1. Frozen food warehouses used solely for storage of Class I and II commodities where protected by an approved automatic sprinkler system. 2. Where areas of buildings are equipped with early suppression fast-response (ESFR) sprinklers, automatic smoke and heat vents shall not be required within these areas. *I'm sure there is probably something similar in OBBC. Assuming that still is the case in OH. Best Regards, Ken Holsopple -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Vince Sabolik Sent: Thursday, December 17, 2009 8:48 AM To: [email protected] Subject: ESFR DOES WHAT??? Good morning, forum -- I want to use control mode heads in an existing warehouse building under 30 ft in height. Somebody (working for the owner) says that he would prefer ESFR heads because (his thought) it eliminates the requirement for heat and smoke vents. If that's true, I would have thought that the sprinkler manufacturer's marketing people would have jumped all over this. That aside, has anybody else ever run into anything like this? thanks! Merry Christmas! Vince Vince Sabolik Christi Fire Protection, Inc. 11351 Pearl Road Strongsville, Ohio 44136 T 440 572-7730 F 440 572-7719 Email: <mailto:[email protected]>[email protected] _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
