That was my thought. But it is a panic filled Monday.....
At 11:03 AM 2/8/2010, you wrote: >Since you are using large room it should not. If you were using area, you >could not take the reduction. > >R/ >Matt > > >Matthew J. Willis, CET >Automatic Fire Sprinklers >Norred Fire Systems L.L.C. >318-387-1134 Voice >318-387-1163 Facsimile >[email protected] >-----Original Message----- >From: [email protected] >[mailto:[email protected]] On Behalf Of Todd Williams >Sent: Monday, February 08, 2010 10:01 AM >To: [email protected] >Subject: mixing standard and QR spklrs in calc? > >I am working on a system for a school where the systems in some >existing classrooms are going to be modified and all QR sprinklers >are going to be installed. The hydraulic area I plan to use is one >classroom of 4-6 sprinklers and two sprinklers in the corridor (meets >requirements). The corridor sprinkler are standard response. That >wouldn't effect the hydraulics in this situation would it? > >Todd G. Williams, PE >Fire Protection Design/Consulting >Stonington, Connecticut >www.fpdc.com >860.535.2080 >_______________________________________________ >Sprinklerforum mailing list >[email protected] >http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > >For Technical Assistance, send an email to: [email protected] > >To Unsubscribe, send an email to:[email protected] >(Put the word unsubscribe in the subject field) > >_______________________________________________ >Sprinklerforum mailing list >[email protected] >http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > >For Technical Assistance, send an email to: [email protected] > >To Unsubscribe, send an email to:[email protected] >(Put the word unsubscribe in the subject field) Todd G. Williams, PE Fire Protection Design/Consulting Stonington, Connecticut www.fpdc.com 860.535.2080 _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
