Greg, me glass wall stuff soon and may be chasing you for info.
On Fri, Apr 9, 2010 at 3:01 PM, Greg McGahan <[email protected]> wrote: > If you are participating in the thread regarding OHIII pls ignore this til > Monday! > > Does anyone have any info on the following: > > Water pressure against glass - specifically, if you calc 40 nozzles for > glazing protection at 7 psi minimum and only one deluge system activates so > there is 168 psi static pressure available and the smallest system is only 5 > nozzles.....at what point does it become a concern? > > Operating temp of Dry Pilot Heads Outside for the same systems - Outside so > the pilot heads should be of the intermediate temp classification (they are > under a soffit for the most part): > > a) Would relatively high pressure and a possible glass temp of over 200 > degress be a problem? > b) when the pilot heads are NOT under a soffit I believe they need to be high > temp - same question. > > Have a great weekend! > > Greg McGahan > > Living Water Fire Protection > (850) 937.1850 | Fax (850) 937.1852 | Cell (850) 554.3231 > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Law, Kevin W > Sent: Friday, April 09, 2010 4:54 PM > To: [email protected] > Subject: RE: OHIII > > You can really tell by the chatter that it is late on a Friday afternoon and > no one is really interested in doing anymore real work for the day. :O] > > > > Kevin Law, PE > Bechtel National, Inc. > Waste Treatment Project > Fire Protection Engineering > Work (509) 371-3280 > Cell (509) 531-5715 > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Todd Williams > Sent: Friday, April 09, 2010 2:23 PM > To: [email protected] > Subject: RE: OHIII > > Brilliant!! > > > > At 05:14 PM 4/9/2010, you wrote: >>In the beginning there was darkness....business was a little slow.... >>:) >> >>Matt Grisé PE*, LEED AP >>Sales Engineer >>Alliance Fire Protection >>*Licensed in KS & MO >> >>913.888.0647 ph >>913.888.0618 f >>913.927.0222 cell >>www. AFPsprink.com >> >> >>-----Original Message----- >>From: [email protected] >>[mailto:[email protected]] On Behalf Of >>A.P.Silva >>Sent: Monday, May 10, 2010 3:14 PM >>To: [email protected] >>Subject: RE: OHIII >> >>Designing sprinklers for inside caves, and drafting on rock walls is >>another story. Then doing hydraulic calculations on the abacus, or did >>that come later? I'd better stop now, or will really be showing my age. >> >>Tony >> >>-----Original Message----- >>From: [email protected] >>[mailto:[email protected]] On Behalf Of Matt >>Grise >>Sent: April 9, 2010 3:00 PM >>To: '[email protected]' >>Subject: RE: OHIII >> >>At least we no longer have to budget time for fighting dinosaurs! >> >>Matt Grisé PE*, LEED AP >>Sales Engineer >>Alliance Fire Protection >>*Licensed in KS & MO >> >>913.888.0647 ph >>913.888.0618 f >>913.927.0222 cell >>www. AFPsprink.com >> >> >>-----Original Message----- >>From: [email protected] >>[mailto:[email protected]] On Behalf Of >>A.P.Silva >>Sent: Monday, May 10, 2010 2:56 PM >>To: [email protected] >>Subject: RE: OHIII >> >>Wait another 20 years. There won't be any piping. Each sprinkler head >>will have its own compressed water supply. Wait, wasn't that how it was >>done ages ago? It's Friday. >> >>Tony >> >>-----Original Message----- >>From: [email protected] >>[mailto:[email protected]] On Behalf Of John >>Drucker >>Sent: April 9, 2010 2:49 PM >>To: [email protected] >>Subject: RE: OHIII >> >>These young guys have it made, vic fittings, weldolets, flex drops and >>plastic pipe !. When I was eager and young we screwed 6" 40 with chain >>wrenches and installed fittings where every outlet had to go. One day >>someone came along with a roustabout and later cut grooved 40 on the >>risers and crosses and we just stared at it. Oh the days of old......... >> >>John >> >>-----Original Message----- >>From: [email protected] >>[mailto:[email protected]] On Behalf Of Roland >>Huggins >>Sent: Friday, April 09, 2010 4:39 PM >>To: [email protected] >>Subject: Re: OHIII >> >> By saying it was ONLY 19 years ago, it doesn't sound like something >>coming from someone that is Young. I just wish that I could qualify >>for the Wise Old timer moniker. Guess I'll settle for Cantankerous, >>old timer or maybe just old. >> >>Roland >> >>On Apr 9, 2010, at 1:22 PM, Ben Young wrote: >> >> > Well if it makes you guys feel any better, they still show the old >> > curves in chapter 11 of the 13 handbook. Besides, it was only 1991 >> > when they changed them! >> > >> > Benjamin Young >> >>_______________________________________________ >>Sprinklerforum mailing list >>[email protected] >>http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum >> >>For Technical Assistance, send an email to: [email protected] >> >>To Unsubscribe, send an email >>to:[email protected] >>(Put the word unsubscribe in the subject field) >> >> >>_______________________________________________ >>Sprinklerforum mailing list >>[email protected] >>http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum >> >>For Technical Assistance, send an email to: [email protected] >> >>To Unsubscribe, send an email >>to:[email protected] >>(Put the word unsubscribe in the subject field) >> >>_______________________________________________ >>Sprinklerforum mailing list >>[email protected] >>http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum >> >>For Technical Assistance, send an email to: [email protected] >> >>To Unsubscribe, send an email >>to:[email protected] >>(Put the word unsubscribe in the subject field) >>_______________________________________________ >>Sprinklerforum mailing list >>[email protected] >>http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum >> >>For Technical Assistance, send an email to: [email protected] >> >>To Unsubscribe, send an email >>to:[email protected] >>(Put the word unsubscribe in the subject field) >> >>_______________________________________________ >>Sprinklerforum mailing list >>[email protected] >>http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum >> >>For Technical Assistance, send an email to: [email protected] >> >>To Unsubscribe, send an email >>to:[email protected] >>(Put the word unsubscribe in the subject field) >>_______________________________________________ >>Sprinklerforum mailing list >>[email protected] >>http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum >> >>For Technical Assistance, send an email to: [email protected] >> >>To Unsubscribe, send an email >>to:[email protected] >>(Put the word unsubscribe in the subject field) > > Todd G. Williams, PE > Fire Protection Design/Consulting > Stonington, CT > 860.535.2080 > www.fpdc.com > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > > For Technical Assistance, send an email to: [email protected] > > To Unsubscribe, send an email to:[email protected] > (Put the word unsubscribe in the subject field) > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > > For Technical Assistance, send an email to: [email protected] > > To Unsubscribe, send an email to:[email protected] > (Put the word unsubscribe in the subject field) > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > > For Technical Assistance, send an email to: [email protected] > > To Unsubscribe, send an email to:[email protected] > (Put the word unsubscribe in the subject field) > -- Ron Greenman Instructor Fire Protection Engineering Bates Technical College Tacoma, WA Member: SFPE, ASCET, NFPA, AFSA, NFSA AFAA, NIBS, WSAFM, WFC _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
