Try New England Manufacturing. They are located a ways down the coast from you. I bought most of my stuff from them. You might also want to look into the new Little Hose Monster. Fairly small and only weighs 3#. I may pick one up at some point myself. If you are in the New England area, let me know. You can borrow my stuff, if it helps.
At 05:23 PM 6/25/2010, you wrote: >Any suggestions on where I should go to get a good basic flow test kit at a >reasonable price including: > > > >1) A diffuser with a fixed pitot port and pressure gauge for the flow >hydrant > >2) A cap with a gauge for the static/residual hydrant > >3) A spanner wrench > >4) Preferably a basic case > > > >I need something light and portable that I can take on a plane with me for >some testing at a variety of sites over the coming months, where the local >utilities don't have this equipment and we won't have any contractor help >available. Thanks in advance for any thoughts, > > > > > >Steve Kowkabany, P.E. > >Fire Protection Engineer > >Neptune Fire Protection Engineering LLC > >60 Ocean Boulevard, Suite 15 > >Atlantic Beach, FL 32233 > >904-652-4200 Phone > >904-212-0868 Fax > > > >_______________________________________________ >Sprinklerforum mailing list >[email protected] >http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > >For Technical Assistance, send an email to: [email protected] > >To Unsubscribe, send an email to:[email protected] >(Put the word unsubscribe in the subject field) Todd G. Williams, PE Fire Protection Design/Consulting Stonington, CT 860.535.2080 www.fpdc.com _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
