The XP 35, is tested to UL Standard 203, while the SWXP 35 and SXP 35 are tested to UL Standard 203 and 203A. Hope that helps.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Bobby Gillett Sent: Tuesday, August 03, 2010 3:48 PM To: [email protected] Subject: RE: Long Bay Purlin hangers/seismic And the SWXP35 for Horizontal, this one carries the UL listing only. Thank you. No more takers on the seismic, huh? Bobby Gillett Sr. Project Manager Key Fire Protection, Inc. (731) 424-0130 office (731) 424-9285 fax (731) 267-4853 cell [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Basalay, Andrea Sent: Tuesday, August 03, 2010 3:43 PM To: [email protected] Subject: RE: Long Bay Purlin hangers/seismic For 16 ga material, a Sammys model SXP 35 can be used for restraint. It is UL listed as a restraint for end of line runs or branch lines that are 2" or less in diameter. It also swivels to the desired 45 degrees for the attachment. In addition, the XP 35 can be used as a pipe hanger for vertical attachments. Both anchors are installed without retaining nuts. However, a special installation tool is needed. Please visit the Sammys website link at for more information: http://www.itwbuildex.com/sas_mdandpurlin.shtml Thanks, Kevin Tucker Senior Project Engineer ITW Buildex P: 630-787-3246 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Bobby Gillett Sent: Tuesday, August 03, 2010 2:52 PM To: [email protected] Subject: RE: Long Bay Purlin hangers/seismic NO Thom, I haven't...but I will - That might be a faster alternative to the Fig 58 and TEK's. How about seismic anyone, any takers on that? Bobby Gillett Sr. Project Manager Key Fire Protection, Inc. (731) 424-0130 office (731) 424-9285 fax (731) 267-4853 cell [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Thom Sent: Tuesday, August 03, 2010 2:42 PM To: [email protected] Subject: RE: Long Bay Purlin hangers/seismic Have you looked at the Sammy Xpress? -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Bobby Gillett Sent: Tuesday, August 03, 2010 12:49 PM To: [email protected] Subject: Long Bay Purlin hangers/seismic Has anyone experienced one of these buildings? It is actually a type of joist with 16gauge steel formed for the top and bottom chords and has roll insulation and standing seam metal roof on top, like a purlin building. For my hanger attachment, I have decided to utilize the Tolco Fig 58 side beam attachment with two ¼x1 Tek screws per its listing, as my largest pipe is 4". But what has me curious is the seismic attachment at the structure. The only thing I can come up with is to through bolt the attachment to the top chord. Does anybody have any other ideas or experience with these? I have a question in to the GC who is asking the building manufacturer, but this has been a long process and would like to see what options others have done. Any other ideas on the hanger would be useful too. I went down the road of the Sammy screw but the only ones that are listed that can be attached to this thin of metal have to have the retaining nut on the back, there is no way to install the nut on this type of structure. Thank you, Bobby Gillett Sr. Project Manager Key Fire Protection, Inc. (731) 424-0130 office (731) 424-9285 fax (731) 267-4853 cell <mailto:[email protected]> [email protected] _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.851 / Virus Database: 271.1.1/3045 - Release Date: 08/03/10 01:35:00 _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.851 / Virus Database: 271.1.1/3045 - Release Date: 08/03/10 01:35:00 _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
