I know my NOODLE is funda-mentally different! It was difficult for me to restrain from telling how to calc the diameter of the impeller on the Pump Churn thread, so you can find out how much it needs to be 'trimmed' to stay below 175 churn. I gotta believe there are at least a few forumites who like a numbers mixed in with the opinions from time to time :) Brad Ps- v=2*pi*r*f
-----Original Message----- From: George Church [mailto:[email protected]] Sent: Monday, September 20, 2010 1:30 PM To: [email protected]; [email protected] Subject: RE: Monitor nozzle Seriously, how many of us were staying up at night this weekend, worrying about the .97 vrs .98? Your nozzle must be fundamentally different :) -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Brad Sent: Monday, September 20, 2010 1:43 PM To: [email protected] Subject: RE: Monitor nozzle --And if you just have Q, convert to ft^3/sec, convert 1.75" diam to ft^2, divide 1st by 2nd to get ft/sec, h=v^2/2g, P= h x .433. (coefficient of discharge for monitor noz might be about .98, g=32.2 ft/sec^2)-- This means the coefficient of discharge is .97 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Brad Sent: Thursday, September 16, 2010 10:16 AM To: [email protected] Subject: RE: Monitor nozzle And if you just have Q, convert to ft^3/sec, convert 1.75" diam to ft^2, divide 1st by 2nd to get ft/sec, h=v^2/2g, P= h x .433. (coefficient of discharge for monitor noz might be about .98, g=32.2 ft/sec^2) -----Original Message----- From: Art Tiroly [mailto:[email protected]] Sent: Thursday, September 16, 2010 9:23 AM To: [email protected] Subject: RE: Monitor nozzle A 1.75" smooth bore nozzle has a K = 88.67. Your nozzle may be different. Art -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Jamie.seidl Sent: Thursday, September 16, 2010 9:43 AM To: [email protected] Subject: Re: Monitor nozzle Thanks Richard. That one is an old one to me :). Must be Monday here. Jamie Sent from my iPhone On Sep 16, 2010, at 9:39 AM, "Richard Carr" <[email protected]> wrote: > K= Q DIVIDED BY SQUARE ROOT OF P, So if you have your Q and P you can > get your K. > > Richard Carr, SET > Design Manager > Associated Sprinkler Co., LLC > 336.373.3901 ext 217 > [email protected] > > > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of > Jamie.seidl > Sent: Thursday, September 16, 2010 9:33 AM > To: Afsa > Subject: Monitor nozzle > > Does anyone have a k factor equivalent for a 1-3/4" monitor nozzle? > > Jamie > Sent from my iPhone > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > > For Technical Assistance, send an email to: [email protected] > > To Unsubscribe, send an email > to:[email protected] > (Put the word unsubscribe in the subject field) > > > This email and any attached files are confidential and intended solely > for the intended recipient(s). If you are not the named recipient you should not read, distribute, copy or alter this email. Any views or opinions expressed in this email are those of the author and do not represent those of the company. Warning: Although precautions have been taken to make sure no viruses are present in this email, the company cannot accept responsibility for any loss or damage that arise from the use of this email or attachments. > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > > For Technical Assistance, send an email to: [email protected] > > To Unsubscribe, send an email > to:[email protected] > (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
