Hello Roland, Hmmm I guess I'll relocate the check valve on the system I just designed. I can move it about 40 feet without problem.
Tuesday, April 5, 2011, 4:41:44 PM, you wrote: > The Annex recommends you locate the check valve so has to REDUCE the > length of non-pressurized pipe which lo and behold concurs with the > opinions provided by our esteemed members of the Forum. > Roland > On Apr 5, 2011, at 1:17 PM, Dewayne Martinez wrote: >> For a riser with a long bulk run to the FDC location is it better to >> locate the check valve by the riser or by the remote FDC? >> Thanks, >> Dewayne >> _______________________________________________ >> Sprinklerforum mailing list >> [email protected] >> http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum >> For Technical Assistance, send an email to: [email protected] >> To Unsubscribe, send an email to:[email protected] >> (Put the word unsubscribe in the subject field) > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > For Technical Assistance, send an email to: [email protected] > To Unsubscribe, send an email to:[email protected] > (Put the word unsubscribe in the subject field) -- Best regards, Charles Thurston Coastal Fire Protection Coastal mailto:[email protected] _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
