SORRY, that was not appropriate... We looked a boat supply warehouse and it was very similar. The issue became the plastic parts and their packaging, The boxes of the very small items stacked on pallets etc. It got very complicated and the engineer and I had to really study the different commodities and how they were packaged and then stored. We ended up with a density for the VAST majority and with storage limitations, height arrangement etc on the rest in our case.
Greg On Wed, May 25, 2011 at 1:48 PM, Travis Mack, SET <[email protected]>wrote: > For storage of a supplier to your typical AutoZone, Pep Boys, etc... What > would you classify storage of these auto parts as?? > > -- > Please feel free to call if you have any questions or comments. > > Sincerely, > > Travis Mack, SET > MFP Design, LLC > 2508 E Lodgepole Drive > Gilbert, AZ 85298 > Office (480) 505-9271 > Fax (866) 430-6107 > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > > For Technical Assistance, send an email to: [email protected] > > To Unsubscribe, send an email to:[email protected] > (Put the word unsubscribe in the subject field) > -- Greg McGahan Living Water Fire Protection, LLC <http://www.livingwaterfp.com> 1160 McKenzie Road Cantonment, FL 32533 850-937-1850 fax 850-937-1852 _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
