Hello George,

But AF off Dry is doable.....


Best regards,
Charles Thurston
 CoastalFire                            mailto:[email protected]

Wednesday, June 1, 2011, 1:24:43 PM, you wrote:

> Well, its way better than AF off dry.....keep the path to what I
> assume is a new DPV as short as possible from incoming service to
> minimize AF into dry. Otherwise, at first glance it seems logical.


> George L.  Church, Jr., CET  
> Rowe Sprinkler Systems, Inc.
> PO Box 407, Middleburg, PA 17842
> 877-324-ROWE       570-837-6335 fax
> [email protected]



> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Todd - FPDC
> Sent: Wednesday, June 01, 2011 1:34 PM
> To: [email protected]; [email protected]
> Subject: Re: Dry system off antifreeze

> This is an existing industrial site with several vacant buildings.
> Several of these are heated only for the sprinkler system. One
> particular building is two level with a main floor and basement. The
> pipe cannot be pitched in the basement but can on the main. A
> suggestion was floated to do antifreeze in the basement and dry
> above. George's point about refilling the antifreeze after the dry
> system trips is a very good one. My other concern was chemical
> compatibility between the antifreeze and the seals on the dry valve.
> My personal take us if they leave the basement wet with maintenance
> heat and do the dry above is the most cost effective. 

> The reason it was suggested was to decrease the amount of antifreeze solution 
> required.

> Good points, all. Keep em coming. 

> Sent from my iPhone

> On Jun 1, 2011, at 12:59 PM, [email protected] wrote:

>> Why not expand the existing antifreeze system?  
>> Sent on the Sprint® Now Network from my BlackBerry®
>> 
>> -----Original Message-----
>> From: Rod DiBona <[email protected]>
>> Sender: [email protected]: Wed, 1 Jun 2011 
>> 09:34:23
>> To: [email protected]<[email protected]>
>> Reply-To: [email protected]
>> Subject: RE: Dry system off antifreeze
>> 
>> Interesting. Have never seen or done one.
>> 
>> -----Original Message-----
>> From: [email protected] 
>> [mailto:[email protected]] On Behalf Of Todd - 
>> FPDC
>> Sent: Wednesday, June 01, 2011 9:35 AM
>> To: [email protected]
>> Subject: Dry system off antifreeze
>> 
>> Anybody done this before? Have a client that asked the question. 
>> 
>> Sent from my iPhone
>> _______________________________________________
>> Sprinklerforum mailing list
>> [email protected]
>> http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
>> 
>> For Technical Assistance, send an email to: [email protected]
>> 
>> To Unsubscribe, send an email 
>> to:[email protected]
>> (Put the word unsubscribe in the subject field) 
>> _______________________________________________
>> Sprinklerforum mailing list
>> [email protected]
>> http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
>> 
>> For Technical Assistance, send an email to: [email protected]
>> 
>> To Unsubscribe, send an email 
>> to:[email protected]
>> (Put the word unsubscribe in the subject field) 
>> _______________________________________________
>> Sprinklerforum mailing list
>> [email protected]
>> http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
>> 
>> For Technical Assistance, send an email to: [email protected]
>> 
>> To Unsubscribe, send an email 
>> to:[email protected]
>> (Put the word unsubscribe in the subject field)
> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

> For Technical Assistance, send an email to: [email protected]

> To Unsubscribe, send an email
> to:[email protected]
> (Put the word unsubscribe in the subject field)
> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

> For Technical Assistance, send an email to: [email protected]

> To Unsubscribe, send an email
> to:[email protected]
> (Put the word unsubscribe in the subject field)


-- 

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

Reply via email to