I believe the company that produces the Hose Monster also sells and can calibrate gauges.
Mike Hill -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Douglas Hicks Sent: Wednesday, May 16, 2012 1:28 PM To: [email protected] Subject: certified gauges We replace gauges every 5 years. I have replaced the gauge and put the old gauge in the test port and compared readings. The readings have always been the same. I can reduce my inventory by purchasing certifed gauges and comparing the readings. If I do this, should we install the certified gauge in the test port at the start of the inspection/test and remove the gauge only at the end of inspection? So, where do I get certified gauges? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://fireball.firesprinkler.org/mailman/private/sprinklerforum/attachment s/20120516/5418acf5/attachment.html> _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
