Well, there you go. I wish everyone would figure that out; my life would be so much easier ...
Actually, I only came up with two local resources in San Diego (8th-largest US city), one of which is a mobile service and the other a brick & mortar facility. There are many regional and super-regional "mail-in" labs, however. Congrats again on finding the correct key words for your search. Sincerely, As per Steve Leyton -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Douglas Hicks Sent: Wednesday, May 16, 2012 12:01 PM To: [email protected] Subject: Re: certified gauges I tried to do the Google earlier, and did not come up with local info. I did the Google again, but this time I added "as per Steve Leyton". That got results! I ordered 3 gauges, with calibration. I will keep them in their own toolbox and keep the calibration papers also. Thanks -----Original Message----- From: Steve Leyton Sent: Wednesday, May 16, 2012 10:48 AM To: [email protected] Subject: RE: certified gauges You can purchase calibration equipment and do it in-house (expensive, but pays over time if you have high-volume biz that regularly requires calibration of gauges), you can send your gauges to a lab; you can hire a mobile service. Dude, it's 2012: Google the key words "Pressure gauge calibration (your city name)" Steve Leyton -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Douglas Hicks Sent: Wednesday, May 16, 2012 10:28 AM To: [email protected] Subject: certified gauges We replace gauges every 5 years. I have replaced the gauge and put the old gauge in the test port and compared readings. The readings have always been the same. I can reduce my inventory by purchasing certifed gauges and comparing the readings. If I do this, should we install the certified gauge in the test port at the start of the inspection/test and remove the gauge only at the end of inspection? So, where do I get certified gauges? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://fireball.firesprinkler.org/mailman/private/sprinklerforum/attach ments/20120516/5418acf5/attachment.html> _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
