It is like a PRV that keeps you from dropping your suction pressure
below a set amount.
Travis Mack, SET
MFP Design, LLC
2508 E Lodgepole Drive
Gilbert, AZ 85298
480-505-9271
fax: 866-430-6107
email:[email protected]
On 3/20/2014 2:42 PM, Cliff Whitfield wrote:
That's what I was thinking Ed. Tim must have something else in mind. I'm
just not sure what :)
Cliff Whitfield, SET
President
Fire Design, Inc.
Ph: 719-488-3479
[email protected]
www.fire-design.com
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of
[email protected]
Sent: Thursday, March 20, 2014 3:41 PM
To: [email protected]
Subject: RE: pump suction control valve
Isn't that just an OS&Y valve?
Should be in your data base
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of G. Tim
Stone
Sent: Thursday, March 20, 2014 2:42 PM
To: [email protected]
Subject: pump suction control valve
Does anyone have a AutoSprink CAD detail for a "Pump Suction Control Valve"?
Would you share if yes?
Thank you in advance.
Regards,
G. Tim Stone
G. Tim Stone Consulting, LLC
NICET Level III Engineering Technician
Fire Protection Sprinkler Design
and Consulting Services
117 Old Stage Rd. - Essex Jct., VT. 05452
CELL: (802) 373-0638 TEL: (802) 434-2968 Fax: (802) 434-4343
<mailto:[email protected]>
[email protected]
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
