Travis,
OK, I'll do that. Thank you.
Regards,
G. Tim Stone
G. Tim Stone Consulting, LLC
NICET Level III Engineering Technician
Fire Protection Sprinkler Design
and Consulting Services
117 Old Stage Rd. - Essex Jct., VT. 05452
CELL: (802) 373-0638 TEL: (802) 434-2968 Fax: (802) 434-4343
[email protected]
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of
Travis
> Mack
> Sent: Thursday, March 20, 2014 5:49 PM
> To: [email protected]
> Subject: Re: pump suction control valve
>
> Tim:
>
> I just use a PRV for the valve, set the fitting to the right dimensions
and
> label it on the drawing.
>
> Travis Mack, SET
> MFP Design, LLC
> 2508 E Lodgepole Drive
> Gilbert, AZ 85298
> 480-505-9271
> fax: 866-430-6107
> email:[email protected]
>
> On 3/20/2014 2:50 PM, G. Tim Stone wrote:
> > Cla-Val model 50B-5KG, 8" globe pattern.
> > Goes on the discharge side of a fire pump when there is a chance of
> > drawing the municipal water supply below 20PSI.
> >
> > I was hoping someone might have a detail.
> >
> > Regards,
> > G. Tim Stone
> >
> > G. Tim Stone Consulting, LLC
> > NICET Level III Engineering Technician Fire Protection Sprinkler
> > Design and Consulting Services
> >
> > 117 Old Stage Rd. - Essex Jct., VT. 05452
> > CELL: (802) 373-0638 TEL: (802) 434-2968 Fax: (802) 434-4343
> > [email protected]
> >
> >
> >> -----Original Message-----
> >> From: [email protected]
> >> [mailto:[email protected]] On Behalf Of
> >> [email protected]
> >> Sent: Thursday, March 20, 2014 5:41 PM
> >> To: [email protected]
> >> Subject: RE: pump suction control valve
> >>
> >> Isn't that just an OS&Y valve?
> >> Should be in your data base
> >>
> >> -----Original Message-----
> >> From: [email protected]
> >> [mailto:[email protected]] On Behalf Of G.
> > Tim
> >> Stone
> >> Sent: Thursday, March 20, 2014 2:42 PM
> >> To: [email protected]
> >> Subject: pump suction control valve
> >>
> >> Does anyone have a AutoSprink CAD detail for a "Pump Suction Control
> >> Valve"?
> >>
> >> Would you share if yes?
> >>
> >>
> >>
> >> Thank you in advance.
> >>
> >>
> >>
> >> Regards,
> >>
> >> G. Tim Stone
> >>
> >>
> >>
> >> G. Tim Stone Consulting, LLC
> >>
> >> NICET Level III Engineering Technician
> >>
> >> Fire Protection Sprinkler Design
> >>
> >> and Consulting Services
> >>
> >>
> >>
> >> 117 Old Stage Rd. - Essex Jct., VT. 05452
> >>
> >> CELL: (802) 373-0638 TEL: (802) 434-2968 Fax: (802) 434-4343
> >>
> >> <mailto:[email protected]>
> >> [email protected]
> >>
> >>
> >>
> >> _______________________________________________
> >> Sprinklerforum mailing list
> >> [email protected]
> >> http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-
> >> firesprinkler.org
> >>
> >>
> >> _______________________________________________
> >> Sprinklerforum mailing list
> >> [email protected]
> >> http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-
> >> firesprinkler.org
> > _______________________________________________
> > Sprinklerforum mailing list
> > [email protected]
> > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkl
> > er.org
>
> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-
> firesprinkler.org
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
