We use 2.5" plastic caps.  Not much value at the scrap yard.  Take the
valves in the pump room and use a bicycle cable & lock to keep them from
wandering off.

Bobby McCullough
Atlanta Sprinkler


-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of
Morey, Mike
Sent: Wednesday, April 09, 2014 8:49 AM
To: [email protected]
Subject: RE: pump test header valves

They make test header outlets with male threaded outlets (basically the
opposite of an FDC) with hose caps that you remove and then screw on
hose valves that have a female swivel on the inlet side.  Of course
there's still the risk of someone stealing the hose caps and/or brass
adapteer fittings that provide the male hose thread, but at least the
valves aren't sitting out there too.

Mike Morey, CFPS, SET
Planner Scheduler/Designer
BMWC Constructors, Inc.
1740 W. Michigan St, Indianapolis, IN 46222
O: 317.651.0596 | C: 317.586.8111
[email protected] | www.bmwc.com

________________________________________
From: [email protected]
<[email protected]> on behalf of Ben Young
<[email protected]>
Sent: Wednesday, April 09, 2014 8:40 AM
To: [email protected]
Subject: pump test header valves

Last week I was at an ASCET meeting where a pump presentation was given.

Someone asked the presenter if it was allowed to remove the test header
valves and keep them in the pump room to stop them from being stolen.

The presenter and few other attendees chimed in that this was ok, and
nothing in 20 or 25 said the valves had to be constantly in place.

I didn't think of it at the time, but now I'm asking myself how then do
you keep debris out of the test header?  The only thing I can think of
is that you would have to cap the nipples or if you remove the nipples,
plug the holes in the test header.  This sounds like it will cause
problems down the road to me.

Have you guys ever seen this done before?

Benjamin Young
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler
.org
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler
.org
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org

Reply via email to