Oh, yes. That was way too easy! -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Wednesday, April 09, 2014 1:28 PM To: [email protected] Subject: Re: pump test header valves
Grooved cap! Sent from my iPhone > On Apr 9, 2014, at 10:51 AM, "Ed Kramer" <[email protected]> wrote: > > Mark, how does the owner typically 'plug' the hole in the side of the > building? > > Ed Kramer > Lawrence, KS > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of > [email protected] > Sent: Wednesday, April 09, 2014 11:54 AM > To: [email protected] > Subject: Re: pump test header valves > > We usually install the header exposed on the outside of the pump > house/room with a grooved connection. When not in use, we remove the > entire header with valves and store it inside for the next test. It > does take about half an hour to reinstall it for the next test. > Mark at Aero > > > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkl > er.org > _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
