I could see a lot of stress on the valve when it is nearly closed
restricting the flow but not when it is fully open.

Art Tiroly
ATCO Fire Protection

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Cahill,
Christopher
Sent: Wednesday, April 16, 2014 10:12 AM
To: [email protected]
Subject: Valve Velocities

Does anyone know if Listed control valves are tested at certain velocities
and what that velocity is?  I mean the water flowing through them not
throwing them in the air.  Theory is some butterfly valves failed due to too
high velocity.  I don't know right now what said velocity is.  While I
figure that out I looked at the cut sheet and don't see a velocity limit in
there.  I know for example double checks are tested at certain velocities
and that information is right on the cut sheets.  In the test standard for
valves is there a test requiring a minimum velocity test for a duration?

Chris Cahill, PE*
Associate Fire Protection Engineer
Burns & McDonnell
Phone:  952.656.3652
Fax:  952.229.2923
[email protected]<mailto:[email protected]>
www.burnsmcd.com<http://www.burnsmcd.com/>
*Registered in: MN


Proud to be #14 on FORTUNE's 2014 List of 100 Best Companies to Work For




_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org

Reply via email to