I have 9 antifreeze loops that need extended down to the required 5 feet. Does 
copper OD match?


Sent from my Verizon Wireless 4G LTE smartphone

<div>-------- Original message --------</div><div>From: Plumbco 
<[email protected]> </div><div>Date:01/09/2015  4:40 PM  (GMT-07:00) 
</div><div>To: [email protected] </div><div>Subject: RE: 
Poz lok </div><div>
</div>
Poz lok pipe had a different O.D. than Sch10 or 40 pipe, the only way I am
aware of connecting to it would require a poz lok male or female adaptor.
The OD being different would exclude the use of grooved fittings.
We did 1 job with it when it came out years ago and it was a nightmare, the
stuff looked a lot cooler on the vendors display table at a convention than
it did on a job site. How many connections do you need to make?

Bill Cunningham
Plumbco, Inc.
229 E Peters Rd.
Wenatchee, WA  98801
509-662-0180 Office
509-670-3999 Cell
509-662-1427 Fax

-----Original Message-----
From: Sprinklerforum [mailto:[email protected]]
On Behalf Of markloganryan
Sent: Friday, January 09, 2015 3:19 PM
To: [email protected]
Subject: Poz lok

I was hoping to get some information about poz lok. Mainly I was needing
information on transitioning to threaded or grooved pipe. Does the pipe have
the same O.D? Can it be grooved?


Sent from my Verizon Wireless 4G LTE smartphone
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org

Reply via email to